Wireless Serial Server
The ADA-14110 wireless serial server transmitt data between devices equipped with the RS232 interface via the wireless network WLAN. The data transmission is without the interference into the format of transmitted data. The functioning in the Wi-Fi WLAN wireless network can be in the virtual serial port mode (port server), TCP and UDP serial gridge. The range of transmission in the wireless network Wi-Fi: - in buildings from 30m to 150m, - in open area to 300m, - in open area at using additional antenna to 8000m. The baud rate is up to 230,4kbps via the RS232 interface. Server use Rx, Tx, RTS, CTS, DTR, DSR, DCD signals of the RS232 interface. It is possible to connect switchboards, code readers, modems, scale, card readers to the RS232 port of ADA-14110. Properties: * Functioning with the data rates up to 11Mbps on the 2,4GHz frequency in the wireless network (IEEE 802.11b standard), * Baud rate in wireless network 1, 2, 5.5, 11 Mbps, * Modulation CCK(11/5 Mbps), DQPSK(2 Mbps), DBPSK(1Mbps), * sensitivity of receiver: -82dBm for 11Mbps, -87dBm for 5.5Mbps, -89dBm for 2Mbps, -92dBm for 1Mbps, * Channel number: 11 (USA/Canada), 13 (Europa), 14 (Japonia), * Antenna conection via SMA connector, * Wireless network security: WEP (64/128-bit encryption), WPA (128-bit encryption), WPA2 (128-bit encryption), PEAP, PSK (pre-shared key mode), * Protocols: TCP, UDP, DHCP, SNMP, SSL/TLS, Telnet, Rlogin, LPD, HTTP/HTTPS, SMTP, ICMP, IGMP, ARP, * WWW sever implemented for server configuration, * Drivers of virtual port COM, * Configuration of net services according to user personal setting, * Static or dynamic IP address (added by DHCP verver), * Diagnostics of serial and network port, * Encoded transmission: SSL v3.0/TLS v1.0 - DES (56-bit), 3DES (168-bit), AES (128/256-bit), * Operating in modes: virtual serial port, serial bridge TCP, serial bridge UDP, * RS232 interface signals: Rx, Tx, RTS, CTS, DTR, DSR, DCD, * Baud rate (bps): 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, * Transparent for all protocols: MODBUS, DNP, PROFIBUS and other, * Any format of byte defined with the specification of RS232 interface, * Connection RS-232 network via DSUB-9 Mail connector, * Stable external power supply 10 - 30 VDC, * 2.5W power consumption, * 1kV= or 3kV= galvanic isolation between Wi-Fi interfaces and power supply, * 1kV= or 3kV= galvanic isolation between RS232 interfaces and power supply, * Implemented protection against power supply reverse connection, * Casing compatible with DIN 43880 standard– mounting in typical electro-installation unit, * Casing adapt to rail mounting according to DIN35 / TS35 standard, * Casing dimensions (W x D x H) 52,8mm x 58mm x 90mm, * Antenna dimensions: length 110mm, diameter 9mm.
|Business address:||str. Sciegiennego 219c|
|Contact name:||Andrzej Resztak [ Email ]|
Product groups: rs232 rs-232 wifi wi-fi port server
Other products from this member