 |
 |
You're here: Electrical & electronic components > Electronic filter > EMI/RFI shields > Twinstrip knitted or cored mesh gaskets
Twinstrip knitted or cored mesh gaskets
KC materials can be supplied as gaskets, in strip form or as pre-cut kits, ready bagged and labelled to suit specific enclosures. Limit stops and collars can be fitted to prevent over-compression or the distortion of mating surfaces. Applications
Twinstrips are used on enclosure doors and covers where an environmental or high IP rated seal is needed in addition to an EMI gasket. The materials provide the shielding levels of knitted mesh combined with the environmental protection of sponge, tubular or solid rubbers. For hazardous situations, such as the presence of hydrocarbon contamination. Furosilicone or other chemical resistant elastomers can be used.
Most Twinstrips have a pressure sensitive adhesive backing with release tape, enabling the gaskets to be quickly and easily fixed in position. The adhesive also helps unmounted gaskets to retain their shape during production and storage and allows the gaskets to be mounted onto any flat surface without the need for a groove or channel to hold it in place.
Manufacturer/supplier's information
| Company name: | P & P Technology Ltd [ Homepage ] | |
| Business address: | Finch Drive, Springwood, Braintree, Essex, United Kingdom |
|
| Zip/postal code: | CM7 2SF | |
| Telephone number: | 01376 550525 | |
| Fax number: | 01376 552389 | |
| Contact name: | Gerry Steel [ Email ] |
Product groups: EMI shields EMI shielding gaskets
Other products from this member
Aluweave - versatile gaskets
Aluweave is a versatile, highly conductive gasket medium produced by filling a woven aluminium mesh with either silicone, flurosilicone or neoprene rubber. It is particularly useful where thicker gaskets are unsuitable but, because it is woven, it is unsuitable for 'landwidths' of less than 3mm for diecut gaskets. Surface irregularities should not exceed 0.05mm.
Elastomer-cored knitted wire meshes
P & P Technology's KE Series elastomer-cored knitted wire meshes consist of two layers of knitted wire over a low-closing-force rubber or elastomer core and offer the same shielding effectiveness of all-mesh types.
Shielded windows
Fully laminated (WF Series) screened windows combine the physical strength and optical clarity of laminated glass or plastic with the shielding effectiveness of fine wire gauze.
Connector Gaskets
P & P Technology manufacture a wide range of connector gaskets, including precision diecut gaskets made from a selection of materials, both conductive and non-conductive. Gaskets can be tailor made to meet individual requirements.
Vent/filter composites
P & P Technology's VB Series of EMC vents / filter assemblies are composites of the VH Series honeycomb attenuation vents and demountable dustfilter panels containing a demembraned polyurethene filter media.
Attenuation vents
P & P Technology's VH Series of lightweight aluminium honeycomb attenuatung ventilation panels comprise of forms of conductive airflow media retained within an aluminium extrusion. They are designed for use in racks and other forms of commercial enclosure.
Silshield - Oriented wires in silicone
Our S Range silicone rubbers combine excellent environmental protection with a high level of shielding effectiveness. These products incorporate a matrix of vertically oriented wires which pierce both flat faces of the elastomer and provide around 100 contact points per square centimetre.
Monex - expanded monel foil
Monex is expanded Monel foil filled with silicone rubber. The exposed foil surface provides excellent conductivity combined with good corrosion resistance. Monex is also 'thin' gasket medium, similar to Aluweave, and is particularly suitable for connector or waveguide gaskets where a pressure seal and EMI shield is required.
Fully laminated windows
Fully laminated screened windows combine the physical strength and optical clarity of laminated glass or plastic with the shielding effectiveness of fine wire gauze.
Conductive adhesive
The one-part conductive particle filled room temperature curing silicone rubber adhesives is available using standard silicone and flurosilicone base compounds combined with a selection of particle fillers to produce a readily extrudable paste which self-cures when exposed to atmospheric moisture.
Conductive silicone
Our E Range gaskets are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity.
Knitted mesh with carrier
Our KM series gasket strip and frame materials consist of a slotted aluminium extrusion carrier into which a solid or elastomer cored knitted mesh gasket is clamped. These ready-to-fit, semi-rigid gasketing profiles help to avoid the problems often encountered when fitting adhesive-backed or plain mesh gaskets.
Edge bonded shielded windows
A low cost range of windows offering the same high level of EMI shielding performace as our range of fully laminated windows (WF Series) but with edge lamination only.
Airfilters with dustfield
Our VF Series of RFI vents combine the benefits of an attenuation vent panel with the properties of a dustfilter in a single frame, unlike the VB Series which utilises separate units fixed together in-situ.
High performance RFI vents & filter composites
P & P Technology's VP Series of honeycomb ventilation panels can be custom manufactured from steel, brass or stainless steel. When selecting the material, corrosion resistance relevant to the application environment should be considered along with the attenuation requirements.
Other products at Electrical & electronic components > Electronic filter > EMI/RFI shields
Metweave - Woven Fabric Gasketing
P & P Technology's MW Series of ultra soft-fabric wrapped shielding profiles utilises a highly conductive and durable impregnated fabric formed around a sponge or foam core to create a very versatile low compression gasket medium.
Knitshield KP Series Knitted Mesh
Knitted wire meshes are produced from a single continuous filament and produce very high levels of EMI shielding performance when evenly compressed between two metallic contact surfaces.
Conductive Foil Tapes
P & P Technology's range of conductive foil tape offers a cost effective solution to EMC shielding. Tapes are available in both copper and aluminium with a conductive adhesive. The tapes can be used to seal joints on enclosures and for ground termination between panels on shielded rooms.
EMI shielding gasket
Fabric over foam gasket is made of high conductive and anticorrosive fabric, with low compressibility PU foam inside, and produced by precise process.
Ads