 |
 |
You're here: Audio equipment > Audio speaker > TS-Series touring speaker
TS-Series touring speaker
The TS-series are compact, exquisite trapezoidal design, comprise of TS-1123, TS-1153, TS-1138 three way full range speakers and TS-18B, TS-28B subwoofers. The computer optimize enclosures and the integral internal suspension hardware for touring or fixed installation application. As mainly three way loudspeaker system, TS series are the another representative products of Sanway loudspeakers. Designing and manufacturing three way loudspeaker system, especially without utilizing complicated passive crossover networks, but still keeping high sensitivity and high SPL, moreover sonic reproduction is extreme true, natural and graceful, is incapable for ordinary factories.
TS series has a wide usage such as in churchs, clubs, large-scale nightclubs, multifunctional meeting rooms, advanced pubs, theaters, etc. As master sound reinforcement systems. Combinating the TS-18B or TS-28B subwoofer to form large-scale P. A. Systems. The projects clients can design and apply them according to specific cases.
TS-1123, 12 inch LF, 10 inch MF, 1 inch HF, 700W RMS
The TS-1123 is a full range 3-way loudspeaker. 10" mid frequency cone driver with a 3" voice coil, and HF section used a 1" exit compression driver with a 34mm voice coil and polymer diaphragm; LF section used a 12" low frequency cone driver with a 3"voice coil. Two steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet. Integral internal alumium rigging hardware for suspension vertical or horizontal application. The enclosure is constructed with 15mm ultra intensity plywood, screwed and glued together for maximum strength and rigidity, and includes steel mesh grille. It is finished in black textured environmental friendly paint. A rear panel connector plate carries two Neutrik Speakon NL4MP for connection to additional enclosures.
Specification:
* Frequency Response (±3 dB): 50 Hz - 19 kHz
* Sensitivity (1w/1m): 101 dB SPL
* Long-term SPL: 126 dB
* Maximum SPL: 132 dB
* Nominal Impedance: 4 ohms
* Power rated: 700 watts
* Peak Power handling: 1400 watts
* Nominal Dispersion: 90ºH x 60ºV
* Crossover Frequency: 2.0 kHz
* Dimensions (H x W x D): 725 mm x 455 mm x 515 mm
* Enclosure Material: 15mm polywood
* Surface Finished: black catalyzed polyurethane paint
* Grille: 1.5mm black perforated steel framed
* Net weight: 32 kg
* Low Frequency Driver: 12", 3" voice coil, 190mm magnet
* Mid Frequency Driver: 10", 3" voice coil, 140mm magnet
* High Frequency Driver: 1" throat, 34mm voice coil. polymer diaphragm
* Input Connectors: Neutrik NL4MPX2
TS-1153, 15 inch LF, 12 inch MF, 2 inch HF, 900W RMS
The TS-1153 is a full range 3-way loudspeaker. 12" mid frequency cone driver with a 3" voice coil, and HF section used a 1.4" exit compression driver with a 44mm voice coil and polymer diaphragm; LF section used a 15" low frequency cone driver with a 3"voice coil. Two steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet. Integral internal alumium rigging hardware for suspension vertical or horizontal application. The enclosure is constructed with 18mm ultra intensity plywood, screwed and glued together for maximum strength and rigidity, and includes steel mesh grille. It is finished in black textured environmental friendly paint. A rear panel connector plate carries two Neutrik Speakon NL4MP for connection to additional enclosures.
Specification:
* Frequency Response (±3 dB): 60 Hz - 19 kHz
* Sensitivity (1w/1m): 101 dB SPL
* Long-term SPL: 128 dB
* Maximum SPL: 134 dB
* Nominal Impedance: 4 ohms
* Power rated: 900 watts
* Peak Power handling: 1800 watts
* Nominal Dispersion: 90ºH x 60ºV
* Crossover Frequency: 2.0 kHz
* Dimensions (H x W x D): 835 mm x 520 mm x 570 mm
* Enclosure Material: 18mm polywood
* Surface Finished: black catalyzed polyurethane paint
* Grille: 1.5mm black perforated steel framed
* Net weight: 48 kg
* Low Frequency Driver: 15", 3" voice coil, 190mm magnet
* Mid Frequency Driver: 12", 3" voice coil, 190mm magnet
* High Frequency Driver: 1.4" throat, 44mm voice coil. polymer diaphragm
* Input Connectors: Neutrik NL4MPX2
TS-1183, 18 inch LF, 12 inch MF, 3 inch HF, 1200W RMS
The TS-1183 is a full range 3-way loudspeaker. MF section used 12" cone driver with a 3" coil voice. and HF section used a 2" exit compression driver with a 3" voice coil and polymer diaphragm; LF section used a 18" low frequency cone driver with a 4"voice coil. Six steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet. Integral internal alumium rigging hardware for suspension vertical or horizontal application. The enclosure is constructed with 18mm ultra intensity plywood, screwed and glued together for maximum strength and rigidity, and includes steel mesh grille. It is finished in black textured environmental friendly paint. A rear panel connector plate carries two Neutrik Speakon NL4MP for connection to additional enclosures.
Specification:
* Frequency Response (±3 dB): 60 Hz - 19 kHz
* Sensitivity (1w/1m): 102 dB SPL
* Long-term SPL: 131 dB
* Maximum SPL: 137 dB
* Nominal Impedance: 4 ohms
* Power rated: 1200 watts
* Peak Power handling: 2400 watts
* Nominal Dispersion: 60ºH x 40ºV
* Dimensions (H x W x D): 1100 mm x 605 mm x 800 mm
* Enclosure Material: 18mm polywood
* Surface Finished: black catalyzed polyurethane paint
* Grille: 1.5mm black perforated steel framed
* Net weight: 95 kg
* Low Frequency Driver: 18", 4" voice coil, 220mm magnet
* Mid Frequency Driver: 12", 3" voice coil, 190mm magnet
* High Frequency Driver: 2" throat, 72mm voice coil. polymer diaphragm
* Input Connectors: Neutrik NL4MPX2
TS-18B, single 18 inch subwoofer, 600W RMS
The TS-18B is a direct radiarity subwoofer designed for use with Array series Speakers.The loudspeaker complement consists of a proprietary 4″ voice coil, and single 18″ drivers. High driving strength is provided by a massive, precision crafted magnet assembly. Four steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet. Integral internal alumium rigging hardware for suspension vertical or horizontal application. The enclosure is constructed with 18mm ultra intensive plywood, screwed and glued together for maximum strength and rigidity, and a steel mesh grille. It is finished in black textured environmenta friendly paint. A rear panel connector plate carries two Neutrik SpeakonNL4MP for connection to additional enclosures.
Specification:
* Frequency Response (±3 dB): 40 Hz - 400Hz
* Sensitivity (1w/1m): 100 dB SPL
* Long-term SPL: 129dB
* Maximum SPL: 135 dB
* Nominal Impedance: 8 ohms
* Power rated: 600 watts
* Peak Power handling: 1200 watts
* Dimensions (H x W x D): 645 mm x 605 mm x 530 mm
* Enclosure Material: 18mm plywood
* Surface Finished: black catalyzed polyurethane paint
* Grille: 1.5mm black perforated steel framed
* Net weight: 65kg
* Low Frequency Driver: 1X18" 100mm voice coil, 220mm magnet
* Input Connectors: Neutrik NL4MPX2
TS-28B, daul 18 inch subwoofer, 1200W RMS
The TS-28B is a direct radiarity subwoofer designed for use with Array series Speakers.The loudspeaker complement consists of a proprietary 4″ voice coil, and daul 18″ drivers. High driving strength is provided by a massive, precision crafted magnet assembly. Four steel handles are provided for easy lifting and carrying and four rubber castor optional for portable or near field application. The enclosure is constructed with 18mm ultra intensive plywood, screwed and glued together for maximum strength and rigidity, and a steel mesh grille. It is finished in black textured environmenta friendly paint. A rear panel connector plate carries two Neutrik SpeakonNL4MP for connection to additional enclosures
Specification:
* Frequency Response (±3 dB): 45 Hz - 800Hz
* Sensitivity (1w/1m): 102 dB SPL
* Long-term SPL: 130dB
* Maximum SPL: 136 dB
* Nominal Impedance: 4 ohms
* Power rated: 1200 watts
* Peak Power handling: 2400 watts
* Dimensions (H x W x D): 565 mm x 1070 mm x 780 mm
* Enclosure Material: 18mm plywood
* Surface Finished: black catalyzed polyurethane paint
* Grille: 1.5mm black perforated steel framed
* Net weight: 102kg
* Low Frequency Driver: 2X18" 100mm voice coil, 220mm magnet
* Input Connectors: Neutrik NL4MPX2
Manufacturer/supplier's information
| Company name: | Sanway Professional Audio Equipment Co., Ltd. [ Homepage ] | |
| Business address: | No.6, Xiaoping Industrial Area, Shijing Town, Baiyun District, Guangzhou, China | |
| Zip/postal code: | 510000 | |
| Telephone number: | 86-20-26290472 | |
| Fax number: | 86-20-26290492 | |
| Contact name: | Johnson [ Email ] |
Product groups: speaker audio speaker loudspeaker outdoor speaker subwoofer PA speaker PA system
Other products from this member
LA-series line array audio speaker
The LA Series is a fully integrated, purpose-designed line of loudspeakers that bring singular advantages to small, medium and large scale real-world applications.
M-series contractor amplifier
The M-series audio amplifier is designed for economical access to the premium sound quality with tremendous value in proven amplifier technology. M-series form the backbone of discriminating rental systems and high-power club installations.
F-series power amplifier
F-Series power amplifiers are designed to live sound reinforcement, touring systems or fixed installation. As toroidal power transformer power amplifiers, they are top standard quality in current market.
TL-series multi-purpose PA speaker
TL series is a multi-purpose series, including 2 way full rang passive speakers and bass speakers. Best cost-benefit ratio in our all series loudspeakers and perfect performance: Pro protect circuits are built into the crossover network to guard the high-frequency and low-frequency transducer from damage.
CL-Series public address speaker
CL series is a public adress range of speakers specifically designed for fixed installation. They benefit from the very compact size, high sound quality and variable rigging accessories. Carefully acoustic design and the use of advanced components contribute to the exceptional music fidelity and speech intelligibility.
P-series four channel amplifier
The new 4-channel P-series amplifiers give you four channels in only two rack spaces, without compromising on power. From 160W to 365W per channel optional. With high output power, versatile loading options, high thermal capacity and unmatched reliability, the P Series is the perfect solution to any permanently installed sound system.
HY-series high performance speaker
HY series high performance speaker is our the latest innovative harvest. High sound pressure, low distortion, wide range frequency response, high sensitivity, high reliability is the most remarkable characters of HY series. Our engineers successfully solve the problems of phase interference and harmonic distortion, high efficiency to enhance sensitivity and fidelity.
Ads