You're here: Computer networking > Network switch > Tri-channel RJ45/BNC A/B switch

Tri-channel RJ45/BNC A/B switch

The Model 8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B. Channel 3 allows access to BNC devices 3-A or 3-B. All channels are switched simultaneously. This network switch supports 8 pins for the RJ45 Cat5e interface, and supports both the center conductor and shield of the BNC interface.

Features:
* Simultaneously switches one RJ45 Channel and two BNC channels locally via a knob located on the front panel.
* Leads switched: All (8) RJ45 pins, plus BNC center conductor and shield
* Packaged in a rugged aluminum enclosure for EMI/RFI protection
* RJ45 channel tested for Cat5e compliance
* Switching is manually operated. Requires no power.
* Chassis size approximately 8" W x 2.25 H x 7.25" D
* All ports located on the rear panel: (3) RJ45 female and (6) BNC female
* Four threaded screw holes located on the bottom panel.
* Custom length cables are available.

Specifications:
* Port Connectors:
(3) RJ45 (F), category 5e connectors on rear panel
(6) BNC (F) Connectors on rear panel
* Controls: (1) Rotary Switch on front panel selects A or B
* Pins Switched:
RJ45: All 8 Pins Switched
BNC: Center Conductor and Shield
* Power: No power required
* Enclosure: Shielded Aluminum Enclosure
* Dimensions: 8"W x 7.25"D x 2.25"H
* Weight: Approximately 2.5 lbs

Manufacturer/supplier's information

Company name:		Electro Standards Laboratories [ Homepage ]
Business address:		36 Western Industrial Drive Cranston, RI, USA
Zip/postal code:		02921
Telephone number:		401-943-1164
Fax number:		401-946-5790
Contact name:		Tina Corticelli [ Email ]

Product groups: Switch network switch

Other products from this member

Load cell smart indicator

The Model 4215A-204-1 Dual Channel Smart Indicator is an intelligent microprocessor based instrument designed for the measurement and control of strain gage transducer based systems.

5-to-1 BNC switch with remote control

PathWay Model 7334 5-to-1 BNC Switch with Remote Control allows the user the capability of accessing five separate devices, ports A through E, via connection through a device connected to the Common port of the switch.

Breakout Box

Model 800 is a (HSSI) High Speed Serial Interface (SCSI-2) Breakout Box that allows users to access and monitor any of the signals that pass through the unit uninterrupted via test point pins.

Cat5 10/100 Base-T Network Switch

The Model 9067 is ideal for government contractors and others who are looking for reliable, expandable, modular network switch systems. Up to 8 units can be housed in one Model 9025 rack.

M8463 9-Channel DB15 Connect / Disconnect Switch

Model 8463 Network Switch is comprised of nine individually controlled, manually operated DB15 Connect / Disconnect Switches that utilizes MIL components and is designed to support rugged MIL applications.

2-Channel RS530 / RJ45 Network Switch

The Model 7249-ESL is a 2-Channel Network Switch, with Channel One allowing the sharing of one DB25 interface device among two others with a Non-Secure and Secure switching option and Channel Two allowing the sharing of a single RJ45 device among two others with an A/B switching option. Both channels can be remotely controlled by Contact Closure or RS232 Serial Data and both hat the option of a secure Cutoff position.

M9456 6-Channel RJ45 A/B Switch, T1, 1U Height, Rackmount

The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.

Remotely controllable network switch

The Model 7284 multi-perpherial A/B sharing switch with remote contact Control provides a powerful tool to manage switching requirements. The Model 7284 network switch switches mouse, keyboard and USB ports simultaneously.

8-strand LC single mode fiber mirror A/B switch

The QuickSwitch® 6261 8-strand fiber optic LC switch with 10 Base-T LAN telnet access, allows the user the capability of sharing 8 fiber optic LC strands connected to the "COMMON" port among two other sets of 8 strands connected to the "A" and "B" ports with local and remote access functionality.

QuickSwitch 7188 4-Channel Fiber Optic, LC Duplex Switch

QuickSwitch Model 7188 is a 4-Channel Fiber Optic LC Duplex, A/B Switch with an RJ45 10/100 Base-T Ethernet Remote Port for primary remote control and a DB9(F) that accepts RS232 Serial ASCII Commands for secondary remote control.

High speed ruggedized fiber to USB interface converter

M4165 is a high speed ruggedized Fiber-to-USB interface converter. With its integrated rate buffering, the M4165 converts USB 2.0 compliant data from a standard PC to a serial asynchronous data interface over fiber with a user selectable baud rate of up to 3 Mbps.

Dual channel RS530 Mode-S network switch, DB25 w/remote

The PathWay® Model 7254 Dual Channel RS-530 Mode-S, AB Switch with DB25 Interface, Remote Control and Auto-Switching Functions allows the user two independent channels of A/B switch function.

Keylock video conference room secure switching system

Model 5150 Video Conference Room Secure Network Switching System passes the connection of copper and fiber voice and data lines from the conference room equipment to the building data network.

USB Type-A, A/B Switch w/Remote Control

The PathWay® Model 4502 USB Type-A A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port of the switch.

High Speed Ruggedized Fiber to Multi-Point RS485/422

The Model 4172 is a very high speed, ruggedized ST Duplex Fiber-to-Multi Point RS485/422 Interface Converter, ideal for applications requiring a single point-to-point or a multi-point communications link over short and long distances.

High Speed Ruggedized Ethernet-to-RS485/422/232 Interface Converter

M4164 Board unit converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from a standard LAN/WAN connection to a serial asynchronous data interface over RS232, or RS485/422 networks with a user selectable baud rate of up to 921,600 bps.

Model 7250 DB37 Network Switch

Model 7250 is a Single Channel DB37 A/B Switch that allows quick connection to any one of two devices from one Common device. The unit may be quickly and conveniently switched between states A and B by pressing its front-panel pushbutton.

Tri-channel RJ45 Cat 5 A/B network switch

M7348 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port for each of the switch's three channels.

Cat 5 RJ45 100-base-T A/B switch

The PathWay® Model 7344 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.

Model 9474 Cat5e RJ45 A/B/OFFLINE Keylock Switch

Model 9474 is an RJ45 A/B/OFFLINE Keylock Switch that allows the sharing of one RJ45 Device among two others or the isolation of all ports by switching to OFFLINE position. Three RJ45 Ports (A, B, and Common) are deep recessed inside unit for security.

Other products at Computer networking > Network switch

6-channel RJ45 Cat 5 A/B switch with individual channel control

The Path Way® Model 7356 6-Channel RJ45 Cat5 A/B Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's six channels.

Cat5e RJ45 A/B Automatic Fallback Switch w/10 Base-T Remote and GUI

The PathWay Model 7339 Cat5e RJ45 A/B Automatic Fallback Switch with 10 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality. Remote Control access can be accomplished using an Ethernet 10/100-BASE-T connection and either Telnet commands or Graphical User Interface (GUI).