Stainless Steel Liquid Level Sensors
LS05 Liquid Level Sensor Series
BUILD YOUR CUSTOM SOLUTION FROM OUR STANDARD OPTIONS! The LS05 Liquid Level Sensors are reaching new levels. Made of a tough stainless steel housing, these sensors can be customized up to 6.5 feet in length, detect countless liquid levels and withstand high water pressure and high temperatures up to 200°C.
Often, designing a sensing system, requires more than 'off the shelf' solutions. More and more applications require unique component development specific to a given set of circumstances.
The LS05 Series Liquid Level Sensors is the most diverse level sensor yet, combining hundreds of standard options ranging from switching power and connectivity to fluid types and number of liquid levels. The LS05 housing stem, constructed of V2A stainless steel can vary in length up to 6.5 feet long and hold any number of magnetic floats with a minimum spacing of 1.5" between them. Its stainless steel housing will withstand high pressure up to 12bar and temperatures up to 200°C when coupled with stainless steel floats. Choose from 10 different magnetic floats, available in four different materials: Polyamide (PA), Polypropylene (PP), Nitrile Butadiene Rubber (NBR) and Stainless Steel (V2A).
Mix and match more than one float material to detect multiple fluid types in the same tank such as in a diesel tank that builds up water condensation over time. The LS05 can be mounted to the top or bottom of a tank or reservoir using a number of different mounting options. Using our OKI and KSK Reed Switches, the LS05 can switch low and high voltages up to 1000 Volts and produce single, multiple or continuous output signals. The LS05's multitude of standard options simplify the process of designing a liquid level sensor for such a diverse array of liquid detection applications.
Switch Rating: 1W-100W
Stem Material: Stainless Steel
Stem Diameter: 7-16mm
Mounting Thread: Metric M10-M30, Standard or NPT
Float Material:Stainless Steel (SS), Polyamide (PA), Polypropylene (PP), Nitrile Butadiene Rubber (NBR)
Features: Normally open or normally closed, Switch low or high voltages up to 1000V, High temperature up to 200°C, High pressure resistance to 12bar, Single, multiple and continuous levels, Any quantity of magnetic floats, Customizable every component, Various mounting options, Hermetically sealed, Dynamically tested contacts, Millions of reliable operations
Applications: Agricultural equipment, Automobiles, Continuous level monitoring, Food & beverage equipment, Humidifiers, Laboratory equipment, Process control equipment, Recreational vehicles, Refrigerated trucks, Watercraft
||10 Little Brook Rd, West Wareham, MA
||Julie Dargie [ Email ]
Other products from this member
MEDER electronic features a full line of reed relays offering high voltage and high power configurations for PCB mount or free-standing applications. MEDER High Voltage Reed Relays are designed to switch high voltages, stand off even higher voltages, and carry very high current levels.
MEDER electronic offers the largest selection of Reed Switches ranging in size from 4mm-52mm in a whole host of contact and power configurations. MEDER is the world's largest OKI Reed Switch source proving solutions for all your standard and custom switching needs. MEDER electronic has a switch for just about every type of switching needs including custom switch lead lengths and forming for PCB or other special mounting requirements.
Three new versions of Level Sensor Series LS03 have been introduced into the market to meet the wider demands of our customer's more specialized application needs. Thus far, the LS03 Level Sensors were only capable of mounting to the inside of the liquid container or reservoir. These level sensors can be externally mounted to devices such as in modern air conditioners, cooling devices, high-pressure cleaners and many other technologically advanced household appliances.
The LS04 Liquid Level Sensors are a versatile multi-point level sensor made of plastic which can be customized to hold up to 6 magnetic floats and mount to either the top or bottom of a tank using various mounting options. The LS04 housing tube comes in two different plastic options, Polyamide (PA) and Polypropylene (PP) and standard lengths ranging from 80mm [3.14"] to 250mm [9.84"].
The CL ,DIL-CL and NP-CL series are used for line sensing in telecommunication devices. These reed relays are superior to electronic solutions regarding flashover and impulse strength. Versions with low coil resistance values down to 4 Ohm and pull-in current
A full line of molded reed relays offered in dual-in-line package for a wide variety of test and measurement, telecommunications, and security equipment applications are available from MEDER electronic. MEDER DIP Series Molded Reed Relays feature high voltage versions in 1-Form-A, 2-Form-A, 1-Form-B, and 1-Form-C packages. Providing high resistance coils up to 2000 W 12 VDC, with up to 4.25 kVDC breakdown voltage, DIP are offered with an internal diode and magnetic shields.
MICRO MACHINED SENSOR NEEDS NO POWER A new, ultra-small magnetically actuated reed sensor that requires no power and is designed for switching CMOS gates and other low power devices such as implantable medical pacemakers and insulin pumps is being introduced by MEDER electronic. MEDER MMS Reed Sensors are magnetically actuated on/off sensors that feature no power draw and measure only 2.8mm x 2.Omm sq. (0.110" x 0.08").
A new series of patented ferromagnetic proximity switches that operate in the presence of a ferrous metal, rather than requiring actuating magnets, is being introduced by MEDER electronic. MEDER MK02 Series Ferromagnetic Metal Detection sensors are single component devices, which sense magnetically conductive materials directly without the need for two separate magnet and sensing elements.
MEDER electronic's MK23 Series Reed Sensors have expanded with the addition of our new MK23-90 Reed Sensor. The MK23- 90-C-2 is a Single-Pole Double-Throw switch with a 14mm glass body. This SPDT (Form C) surface mount sensor comes in two lead designs, lead design 1 (straight cut axial lead) and lead design 2 ("Gull Wing" with coined bent leads). The MK23-90 sensor comes in 5 contact sensitivity ranges.
A new line of compact liquid level sensors that are more reliable than mechanical switches and are an alternative to costly Hall effect sensors is being introduced by MEDER electronic. MEDER LS-Series Liquid Level Sensors are made from corrosion-resistant materials and feature magnetic floats which activate reed switches when the liquid level rises or falls, as desired, and then provides an output signal. Requires no external power to operate.
The CR series is our smallest and most versatile instrument grade reed relay series. The CRF Series has a flat insertion loss curve from DC up to 7 GHz, attained by keeping the signal path as short as possible and using an internal coaxial shield with a consistent 50 Ohm impedance path. Not only is it excellent with RF signals, but is also great for digital signals where the skew rates or effects on the rise time of fast digital pulses is less than 40 picoseconds through the relay.
Miniature SIL HV Series High Voltage/High Current Reed Relays in an epoxy sealed, single-in-line package measuring only 24mm x 6.4mm x 8.9mm. An optional offset pin-out measuring 29mm x 6.4mm x 8.9mm is also available. Standard coil selections include 5 or 12 volts with or without diode suppression. This series can switch up to 1000 volts and carry up to 5 amps for up to 50 milli-seconds at a consistent repetition rate or 10A pulse
REED SENSORS REPLACE MECHANICAL SWITCHES The Rectangular Flange Mount Reed Sensors offer billions of reliable switching operations in wet and dirty applications. These magnetically operated reed proximity switches are waterproof and can be mounted almost anywhere, making them suitable replacements for mechanical switches. MEDER's Reed Sensor series MK02, MK04, MK05, MK09, MK12, MK13 and MK21 are magnetically operated reed proximity switches constructed in hermetically sealed packages.
1 GHz REED RELAYS RATED FOR ONE BILLION OPERATIONS A full line of electrostatic- and coaxial shielded reed relays that come in several versions for use in OEM and aftermarket ATE test equipment is being introduced by MEDER electronic. MEDER LP-Series Reed Relays are designed for 1 GHz applications and feature compact metal cases with hermetically sealed contacts. Rated for one billion operations, these magnetically-shielded devices provide 1012 ohm insulation resistance. 5, 12, & 24VDC
The 2-Pole Micro SIL expands the MS Series Reed Relays MICRO SIL Reed Relays are a single-in-line Reed Relay using only 15.11 x 3.81 mm of board space which is half the standard SIL requirement. They are used as voltage relays and are designed for pick-and-place assembly equipment, allowing close placement on PC boards. MEDER MS Series Micro SIL Reed Relays are rugged and highly uniform for use with high speed pick-and-place assembly equipment and feature an internal magnetic shield which allo
Miniature High Voltage Reed Relays In the modern world, there is a constant drive to reduce size yet increase the performance of almost every type of electronic component. With that in mind, MEDER electronic has introduced two new high voltage Reed Relays for PCB mounting. These miniature high voltage relays take up only 40x15x13.5mm board area. These high voltage relays offer a switching voltage of 1 kVDC with a 4 kVDC or 6-kVDC option across the contacts.
Magnetic Reed Switches can be customized for your design needs. Some customization includes sorting specific magnetic sensitivity pull-in ranges and cutting and/or bending the Reed contact leads for either horizontal or vertical surface mount applications or other special mounting requirements. Proper handling and manufacturing technique as well as specialized equipment are essential to producing high quality Reed Products.
The MK11 Series offers sensor mounting convenience with its built-in threaded portal. Used in limit switching, end position, and proximity switching applications, these MK11 Reed Sensors are offered in plastic, stainless steel, and now a new brass version. This new brass version of our MK11 is more robust and resilient to harsh conditions. They are an affordable and excellent choice for all applications requiring flexible sensing adjustment and multiple switching options.
KSK-1A04 Series Reed Switches are magnetically actuated, ultraminiature, low power reed switches. Designed with flat lead terminals they provide consistent contact orientation and larger contact soldering surface in SMT applications. KSK-1A04 Series Reed Switches, at 4mm in glass size are currently the smallest reed switch offered by MEDER electronic and the world's smallest reed switch with flat contact terminals.
Seven series of compact surface mount reed sensors that require no external power for detecting movement and fluid levels in consumer products such as coffee makers, and automotive, medical, security, and telephone hook switch applications are sealed in a rugged thermoset molded package. MEDER SMD Reed Sensors are magnetically operated proximity sensors used to detect movement.
Other products at Sensors, transducers, detectors > Liquid level sensor
HHLT (smart) flange type level transmitter can carry on accurate measurement of level and density for all kinds of containers. Level flange and insert flange are available. Flange has 3 inches or 4 inches. Specification has 1501b and 3001b flanges. We may also have flange custom-made.
This water level indicator can be used for pump switch on and off, to prevent dry running of pumps and for preventing overflow of service material in the process plants.
Elixir is a tuning fork based level sensor for liquids where the fork is kept in mechanical vibration at resonance frequency by piezo crystals. When the tines of the fork are immersed in liquid, the frequency changes which is sensed electronically and processed signal is used for switching.
Series liquid level transmitter is the extension and development of pressure transmitter which is based on the principle that pressure generated by liquid with different specific gravity at different height are linear to realise the accurate measurement and transmission of volume, level height and weight of water, oil and pasted matters.
This liquid level indicator is based on the vibratig fork principle and has a built in microprocessor. The switch can be used to monitor the level of any liquid with viscosity up to 10000 cP.