 |
 |
You're here: Telecommunication equipment > Fiber optic communication > Fiber optic switch > ST duplex fiber optic mirror A/B switch
ST duplex fiber optic mirror A/B switch
QuickSwitch Model 6272 ST Duplex Fiber Optic Mirror A/B Switch with Remote Serial Control supports Fiber Optic wavelength of 1300nm and gigabyte date rate. The Model 6272 affords local and remote access functionality. Remote access can be accomplished by RS232 commands sent via the Remote Serial Port. Users can remotely monitor status and control switch functions. Users can remotely monitor status and control switch functions. The switch uses mirror technology and is transparent to data and speed. The Model 6272 supports a Fiber Optic wavelength of 1300nm and gigabyte date rate. The Model 6272 uses MEMS (Micro Electro Mechanical System) technology and is transparent to data and speed. A, B, and COM ports are ST Duplex Multimode 62.5/125 Micron. The switch is controlled via front panel pushbutton control or Remote ASCII Command access through the serial port. Front panel LEDs display the current switch position. DB9/Female RS232 Serial Port for Remote Control. The switching time is less than 1 msec. A rackmount configuration is standard.Specifications
The Wavelength: 1300 nm.
Port Connectors: (3) ST duplex fiber optic rear panel connectors, labeled A, B, and COMMON.
Control: Front panel pushbutton allows local selection of switch position.
Remote Control: (1) DB9 (F) cnnector on rear panel accepts serial RS232.
Display: (2) Red LEDs display switch position, status, and power presence.
Power: UL Approved 120 VAC, 60 Hz wall mount power module supplies 12 VAC, 500 mA to the Model 6272.
Weight: Approximately 4.5 lbs.
Manufacturer/supplier's information
| Company name: | Electro Standards Laboratories [ Homepage ] | |
| Business address: | 36 Western Industrial Drive Cranston, RI USA |
|
| Zip/postal code: | 02921 | |
| Telephone number: | 401-943-1164 | |
| Fax number: | 401-946-5790 | |
| Contact name: | Jeannette Gouin [ Email ] |
Product groups: Fiber optic switch switch network switch
Other products from this member
6-channel RJ45 Cat 5 A/B switch with individual channel control
The Path Way® Model 7356 6-Channel RJ45 Cat5 A/B Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's six channels.
2-Channel RS530 / RJ45 Network Switch
The Model 7249-ESL is a 2-Channel Network Switch, with Channel One allowing the sharing of one DB25 interface device among two others with a Non-Secure and Secure switching option and Channel Two allowing the sharing of a single RJ45 device among two others with an A/B switching option. Both channels can be remotely controlled by Contact Closure or RS232 Serial Data and both hat the option of a secure Cutoff position.
High Speed Ruggedized Ethernet-to-RS485/422/232 Interface Converter
M4164 Board unit converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from a standard LAN/WAN connection to a serial asynchronous data interface over RS232, or RS485/422 networks with a user selectable baud rate of up to 921,600 bps.
High Speed Ruggedized Fiber to Multi-Point RS485/422
The Model 4172 is a very high speed, ruggedized ST Duplex Fiber-to-Multi Point RS485/422 Interface Converter, ideal for applications requiring a single point-to-point or a multi-point communications link over short and long distances.
RJ45 A/B/offline switch with keylock switching control
The Model 9065 network switch module allows the user to switch a device connected to the COMMON port between devices connected to ports A or B.
DB-9 A/B Switch with RS232 Remote Control
Model 7200 DB9 A/B Switch with Remote Control via RS232 Serial port allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port of the switch.
8-strand LC single mode fiber mirror A/B switch
The QuickSwitch® 6261 8-strand fiber optic LC switch with 10 Base-T LAN telnet access, allows the user the capability of sharing 8 fiber optic LC strands connected to the "COMMON" port among two other sets of 8 strands connected to the "A" and "B" ports with local and remote access functionality.
High speed ruggedized fiber to USB interface converter
M4165 is a high speed ruggedized Fiber-to-USB interface converter. With its integrated rate buffering, the M4165 converts USB 2.0 compliant data from a standard PC to a serial asynchronous data interface over fiber with a user selectable baud rate of up to 3 Mbps.
ST duplex fiber optic mirror A/B switch
ST duplex fiber optic mirror A/B switch supports fiber optic wavelength of 850 nm and gigabyte data rate. Model 6273 uses mirror technology and can be accessed remotely by using DB9 RS232 Serial port.
Model 9474 Cat5e RJ45 A/B/OFFLINE Keylock Switch
Model 9474 is an RJ45 A/B/OFFLINE Keylock Switch that allows the sharing of one RJ45 Device among two others or the isolation of all ports by switching to OFFLINE position. Three RJ45 Ports (A, B, and Common) are deep recessed inside unit for security.
Remotely controllable network switch
The Model 7345 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
RJ45 A/B switch with GUI interface to 10 Base-T LAN remote control
The PathWay Model 7341 RJ45 A/B Switch with 10 Base-T LAN Telnet Access and Cat 5e compliance provides a powerful and versatile tool to manage switching requirements.
Breakout Box
Model 800 is a (HSSI) High Speed Serial Interface (SCSI-2) Breakout Box that allows users to access and monitor any of the signals that pass through the unit uninterrupted via test point pins.
M9456 6-Channel RJ45 A/B Switch, T1, 1U Height, Rackmount
The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.
Cat5 10/100 Base-T Network Switch
The Model 9067 is ideal for government contractors and others who are looking for reliable, expandable, modular network switch systems. Up to 8 units can be housed in one Model 9025 rack.
Cat 5 RJ45 100-base-T A/B switch
The PathWay® Model 7344 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
USB Type-A, A/B Switch w/Remote Control
The PathWay® Model 4502 USB Type-A A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port of the switch.
Load cell smart indicator
The Model 4215A-204-1 Dual Channel Smart Indicator is an intelligent microprocessor based instrument designed for the measurement and control of strain gage transducer based systems.
Tri-channel RJ45/BNC A/B switch
M8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B.
Cat5e RJ45 A/B Automatic Fallback Switch w/10 Base-T Remote and GUI
The PathWay Model 7339 Cat5e RJ45 A/B Automatic Fallback Switch with 10 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality. Remote Control access can be accomplished using an Ethernet 10/100-BASE-T connection and either Telnet commands or Graphical User Interface (GUI).
Other products at Telecommunication equipment > Fiber optic communication > Fiber optic switch
QuickSwitch 7188 4-Channel Fiber Optic, LC Duplex Switch
QuickSwitch Model 7188 is a 4-Channel Fiber Optic LC Duplex, A/B Switch with an RJ45 10/100 Base-T Ethernet Remote Port for primary remote control and a DB9(F) that accepts RS232 Serial ASCII Commands for secondary remote control.
ST duplex fiber optic switch with remote Ethernet port and GUI
ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port allows the user to switch one Common ST Duplex port to any one of ten ST Duplex ports. The system affords local and remote access functionality. The Remote Ethernet Port allows for both Telnet and GUI remote control.
Quad channel fiber optic A/B switch
QuickSwitch Model 6257 4-Channel Fiber Optic A/B Switch allows devices connected to COMMON port of each channel access to the A or B port of each channel. All channels are switched simultaneously.
6-Channel All Optic Online/Offline Switch w/Remote
Model 6258 6-Channel LC Duplex, All Optic Online/Offline Switch with 10 Base-T LAN TELNET access allows the user to connect each input fiber optic cable to its respective output fiber optic cable or, alternatively, to disconnect the input fiber optic cable from its respective output fiber optic cable. All channels are switched, individually.
ST duplex fiber optic 8-position switch
The QuickSwitch 6275 ST Duplex 8-position fiber optic switch with Remote serial control allows the user to switch one Common ST Duplex port to any one of eight ST Duplex ports, or to be switched to an Off-Line position isolating all ports from each other.
Ads