 |
 |
You're here: Electrical & electronic components > Electronic filter > EMI/RFI shields > Silshield - Oriented wires in silicone
Silshield - Oriented wires in silicone
The materials, which include solid (SP Series) and sponge (SS Series) variants as well as Flurosilicone (SF Series), sponge silicone flame retardant (SG Series) and solid silicone flame retardant (SR Series) options, are produced in sheet or strip form and are usually factory fabricated and diecut into gasket profiles to customers specifications.The S Range is probably the most versatile of gasket materials. They provide good environmental protection and are regularly used where long service life, high performance fixed gaskets are needed.
Because of the harder nature of the material, and because it needs a strong closing force through a relatively rigid cover which is screw fixed at regular intervals, they are not generally suitable for doorselas or other applications where a regular opening and closing application applies. The possible exception to this is the SS Series.
They are usually supplied in gasket, strip or sheet form with a pressure sensitive adhesive backing which holds the gasket in the absence of a groove or channel. If a groove is available the gasket form is often a jointed 'o' ring without the adhesive backing.
Because S Range elastomers are wider than they are high when specifying the thickness should be stated first as this will be the length of the embedded wires.
Then, if the height needs to be greater than the width (i.e. to fit into a groove), there will be no doubt about your actual needs.
Particular care needs to be taken over the design of gaskets to ensure that fixing covers or doors do not distort during compression. It is often necessary to incorporate 'limit stops' into the gaskets to prevent over-compression. The material should be compressed by approximately 15% of its relaxed height.
Manufacturer/supplier's information
| Company name: | P & P Technology Ltd [ Homepage ] | |
| Business address: | Finch Drive, Springwood, Braintree, Essex, United Kingdom |
|
| Zip/postal code: | CM7 2SF | |
| Telephone number: | 01376 550525 | |
| Fax number: | 01376 552389 | |
| Contact name: | Gerry Steel [ Email ] |
Other products from this member
Shielded windows
Fully laminated (WF Series) screened windows combine the physical strength and optical clarity of laminated glass or plastic with the shielding effectiveness of fine wire gauze.
Elastomer-cored knitted wire meshes
P & P Technology's KE Series elastomer-cored knitted wire meshes consist of two layers of knitted wire over a low-closing-force rubber or elastomer core and offer the same shielding effectiveness of all-mesh types.
Vent/filter composites
P & P Technology's VB Series of EMC vents / filter assemblies are composites of the VH Series honeycomb attenuation vents and demountable dustfilter panels containing a demembraned polyurethene filter media.
Conductive silicone
Our E Range gaskets are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity.
Airfilters with dustfield
Our VF Series of RFI vents combine the benefits of an attenuation vent panel with the properties of a dustfilter in a single frame, unlike the VB Series which utilises separate units fixed together in-situ.
Attenuation vents
P & P Technology's VH Series of lightweight aluminium honeycomb attenuatung ventilation panels comprise of forms of conductive airflow media retained within an aluminium extrusion. They are designed for use in racks and other forms of commercial enclosure.
Fully laminated windows
Fully laminated screened windows combine the physical strength and optical clarity of laminated glass or plastic with the shielding effectiveness of fine wire gauze.
Monex - expanded monel foil
Monex is expanded Monel foil filled with silicone rubber. The exposed foil surface provides excellent conductivity combined with good corrosion resistance. Monex is also 'thin' gasket medium, similar to Aluweave, and is particularly suitable for connector or waveguide gaskets where a pressure seal and EMI shield is required.
Edge bonded shielded windows
A low cost range of windows offering the same high level of EMI shielding performace as our range of fully laminated windows (WF Series) but with edge lamination only.
Aluweave - versatile gaskets
Aluweave is a versatile, highly conductive gasket medium produced by filling a woven aluminium mesh with either silicone, flurosilicone or neoprene rubber. It is particularly useful where thicker gaskets are unsuitable but, because it is woven, it is unsuitable for 'landwidths' of less than 3mm for diecut gaskets. Surface irregularities should not exceed 0.05mm.
Knitted mesh with carrier
Our KM series gasket strip and frame materials consist of a slotted aluminium extrusion carrier into which a solid or elastomer cored knitted mesh gasket is clamped. These ready-to-fit, semi-rigid gasketing profiles help to avoid the problems often encountered when fitting adhesive-backed or plain mesh gaskets.
High performance RFI vents & filter composites
P & P Technology's VP Series of honeycomb ventilation panels can be custom manufactured from steel, brass or stainless steel. When selecting the material, corrosion resistance relevant to the application environment should be considered along with the attenuation requirements.
Conductive adhesive
The one-part conductive particle filled room temperature curing silicone rubber adhesives is available using standard silicone and flurosilicone base compounds combined with a selection of particle fillers to produce a readily extrudable paste which self-cures when exposed to atmospheric moisture.
Connector Gaskets
P & P Technology manufacture a wide range of connector gaskets, including precision diecut gaskets made from a selection of materials, both conductive and non-conductive. Gaskets can be tailor made to meet individual requirements.
Twinstrip knitted or cored mesh gaskets
Twinstrip is a combination of knitted or cored mesh gasket with a non-conductive environmental seal. The wire mesh types used are Monel, Aluminium, TCS and Stainless Steel and the permutations of wire and elastomer combinations are almost endless providing a wide range of environmental, water, dust and pressure seals.
Other products at Electrical & electronic components > Electronic filter > EMI/RFI shields
Knitshield KP Series Knitted Mesh
Knitted wire meshes are produced from a single continuous filament and produce very high levels of EMI shielding performance when evenly compressed between two metallic contact surfaces.
Metweave - Woven Fabric Gasketing
P & P Technology's MW Series of ultra soft-fabric wrapped shielding profiles utilises a highly conductive and durable impregnated fabric formed around a sponge or foam core to create a very versatile low compression gasket medium.
Conductive Foil Tapes
P & P Technology's range of conductive foil tape offers a cost effective solution to EMC shielding. Tapes are available in both copper and aluminium with a conductive adhesive. The tapes can be used to seal joints on enclosures and for ground termination between panels on shielded rooms.
EMI shielding gasket
Fabric over foam gasket is made of high conductive and anticorrosive fabric, with low compressibility PU foam inside, and produced by precise process.
Ads