 |
You're here: Telecommunication equipment > Fiber optic communication > Fiber optic switch > QuickSwitch 7188 4-Channel Fiber Optic, LC Duplex Switch
QuickSwitch 7188 4-Channel Fiber Optic, LC Duplex Switch
The QuickSwitch® 7188 4-Channel Fiber Optic LC Duplex A/B Switch with Ethernet and RS232 Remote allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports for each channel. Remote Control access can be accomplished via the RJ45(F) Remote port using an Ethernet 10/100Base-T connection and either Telnet commands or graphical user interface, or can be accomplished via the DB9(F) Remote port using RS-232 serial commands.Model 7188 QuickSwitch Fiber Optic Network Switch Features:
- All fiber optic ports are LC Duplex Connectors, Multimode, 62.5/125 micron, support a wavelength of 1300nm, and support speeds of 100Mbps.
- The switch ports are transparent to all data.
- Independent front panel pushbutton control for each channel.
- Front panel LED's display current position for each channel and power status.
- The switch has (2) Remote Control ports.
- The primary Remote Control port is an RJ45 10/100 Base-T Ethernet
- Remote Port that accepts both Telnet commands and a GUI interface.
- The secondary Remote Control port is a DB9(F) that accepts RS232 Serial ASCII commands.
- When power is lost, unit isolates all communication ports and does not pass data.
When power is restored, the unit automatically switches to the last known position.
- IP Addressable.
Software Features:
Access User Interface via standard web browser.
Easy to use, simple point and click operation. For complete details and screen capture images, request, operation manual.
Remotely access to control or monitor the QuickSwitch® 7188 Switch System.
Users can change the switch's IP address.
LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly.
Specifications:
Port Connectors (12) Fiber Optic LC duplex, multimode connectors labeled A,
B, and Common.
Front Panel Controls: (4) Front panel pushbuttons allow selection of
switch position.
Display: (8) Front panel LEDs' display switch position, and power status.
Primary Remote Control: (1) RJ45 female connector accepts 10/100 Base-T
LAN access Ethernet that uses both Telnet commands and a GUI interface for remote control operation.
Secondary Remote Control: (1) DB9(F) connector on rear panel accepts ASCII RS232 Serial Data for remote control operation.
Fiber Size & Wavelength: Multimode, 62.5/125 micron, 1300 nm.
Power: "Wide Range" CE and UL listed table mount power module (Cat.No. 522586) 100VAC/240VAC, 50Hz/60Hz. Ideal for international applications.
Dimensions: Rackmount, 19.00" W x 10.0" D x 3.5" H
Weight: Approximately 7.5 lbs (3.4 kg).
Manufacturer/supplier's information
| Company name: | Electro Standards Laboratories | |
| Business address: | 36 Western Industrial Drive Cranston, RI |
|
| Zip/postal code: | 02921 | |
| Telephone number: | 401-943-1164 | |
| Fax number: | 401-946-5790 | |
| Contact name: | Tina Corticelli [ Email ] |
Other products from this member
Tri-Channel RJ45 Cat5 A/B Switch w/Remote
The PathWay® Model 7359 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's three channels.
Digital signal conditioner for strain gage sensors
The CellMite Model 4337 with auto identifying display is a digital signal conditioner that connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC.
Tri-channel RJ45/BNC A/B switch
M8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B.
Load cell smart indicator
The Model 4215A-204-1 Dual Channel Smart Indicator is an intelligent microprocessor based instrument designed for the measurement and control of strain gage transducer based systems.
M9456 6-Channel RJ45 A/B Switch, T1, 1U Height, Rackmount
The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.
Tri-channel RJ45 Cat 5 A/B network switch
M7348 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port for each of the switch's three channels.
High speed ruggedized fiber to USB interface converter
M4165 is a high speed ruggedized Fiber-to-USB interface converter. With its integrated rate buffering, the M4165 converts USB 2.0 compliant data from a standard PC to a serial asynchronous data interface over fiber with a user selectable baud rate of up to 3 Mbps.
8-channel RJ45 A/B switch with redundant remote control & power supply
The Model 7237 8-Channel RJ45 A/B Switch with Redundant Remote Control and Power allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port.
ST duplex fiber optic mirror A/B switch
The QuickSwitch 6272 ST duplex fiber optic A/B switch with remote serial control provides a powerful and versatile tool to manage switch requirements. M6272 can be switched locally via a pushbutton or remotely via remote serial port.
High Speed Ruggedized Ethernet-to-RS485/422/232 Interface Converter
M4164 Board unit converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from a standard LAN/WAN connection to a serial asynchronous data interface over RS232, or RS485/422 networks with a user selectable baud rate of up to 921,600 bps.
Quad channel fiber optic A/B switch
QuickSwitch Model 6257 4-Channel Fiber Optic A/B Switch allows devices connected to COMMON port of each channel access to the A or B port of each channel. All channels are switched simultaneously.
ST duplex fiber optic mirror A/B switch
ST duplex fiber optic mirror A/B switch supports fiber optic wavelength of 850 nm and gigabyte data rate. Model 6273 uses mirror technology and can be accessed remotely by using DB9 RS232 Serial port.
Cat5e RJ45 A/B Automatic Fallback Switch w/10 Base-T Remote and GUI
The PathWay Model 7339 Cat5e RJ45 A/B Automatic Fallback Switch with 10 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality. Remote Control access can be accomplished using an Ethernet 10/100-BASE-T connection and either Telnet commands or Graphical User Interface (GUI).
USB Type-A, A/B Switch w/Remote Control
The PathWay® Model 4502 USB Type-A A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port of the switch.
M8463 9-Channel DB15 Connect / Disconnect Switch
Model 8463 Network Switch is comprised of nine individually controlled, manually operated DB15 Connect / Disconnect Switches that utilizes MIL components and is designed to support rugged MIL applications.
DB-9 A/B/C/D switch with exclusive remote control
This compact, desktop, network switch enables connection of a workstation or device between 4 other devices or networks. The switch ports are transparent to data format.
Remotely controllable network switch
The Model 7345 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
ST duplex fiber optic 8-position switch
The QuickSwitch 6275 ST Duplex 8-position fiber optic switch with Remote serial control allows the user to switch one Common ST Duplex port to any one of eight ST Duplex ports, or to be switched to an Off-Line position isolating all ports from each other.
High Speed Ruggedized Fiber to Multi-Point RS485/422
The Model 4172 is a very high speed, ruggedized ST Duplex Fiber-to-Multi Point RS485/422 Interface Converter, ideal for applications requiring a single point-to-point or a multi-point communications link over short and long distances.
ST duplex fiber optic switch with remote Ethernet port and GUI
ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port allows the user to switch one Common ST Duplex port to any one of ten ST Duplex ports. The system affords local and remote access functionality. The Remote Ethernet Port allows for both Telnet and GUI remote control.
Other products at Telecommunication equipment > Fiber optic communication > Fiber optic switch
QuickSwitch 6296 A/B/C/D Bypass Switch
QuickSwitch Model 6296 is a Single Mode, LC Duplex Fiber Optic Bypass Switch that supports connections between four sets of devices or peripherals, in two different switch positions, Normal and Bypass.
6-Channel All Optic Online/Offline Switch w/Remote
Model 6258 6-Channel LC Duplex, All Optic Online/Offline Switch with 10 Base-T LAN TELNET access allows the user to connect each input fiber optic cable to its respective output fiber optic cable or, alternatively, to disconnect the input fiber optic cable from its respective output fiber optic cable. All channels are switched, individually.
8-strand LC single mode fiber mirror A/B switch
The QuickSwitch® 6261 8-strand fiber optic LC switch with 10 Base-T LAN telnet access, allows the user the capability of sharing 8 fiber optic LC strands connected to the "COMMON" port among two other sets of 8 strands connected to the "A" and "B" ports with local and remote access functionality.
Ads