---

PTC thermistor for overload & over-current protection

Ceramic PTC (positive temperature coefficient) thermistors are used instead of conventional fuses to protect load, such as motors, transformers, or electronic circuit, against overcurrent for circuit protection. PTC thermistor protector not only respond to inadmissibly high currents but also if a preset temperature limit is exceeded. PTC thermistor over-current protector limits the power dissipation of the whole circuit by increasing their resistance and thus reducing the current to a harmless residual value.

The operating principle is as indicated in the following. When a circuit is in the normal status, the current through PTC is lower than the rated current and PTC thermistor protector is in the normal state with small resistance value, which will not affect the normal operation of the protected circuit. In case of some fault in the circuit and the current is greater than the rated current, the PTC thermistor protector will become hot quickly and present a high resistance state, which sets the circuit relatively "off" to protect the circuit from damage. After the fault is removed, PTC thermistor protector will automatically restore its low resistance state and the circuit will resume normal operation. From point A to point B, the voltage on PTC thermistor protector increases gradually, current through PTC thermistor current limiting device also increases linearly, it indicates that PTC thermistor protector resistance keeps almost unchanged, in low resistance state; From point B to F, the voltage increases gradually, PTC thermistor protector resistance increases sharply due to heating, current through PTC thermistor current limiting device decreases rapidly, it indicates that PTC thermistor current limiting device in protection state. Normal load curve lower than point B, PTC thermistor over current protection device won't enter into protection state.

Normally, when PTC thermistor is used as an overcurrent protection component, it is preferred to select maximum operating current, maximum operating voltage and proper specifications. Furthermore such factors should be taken into consideration as the dimensions of the components, rated zero-power resistance, operating temperature range, etc. Relation between operating temperature, operating current and non-operating current is as shown in Fig.2. Operating current is normally 2~3 times non-operating current, and both of the currents will be reduced as operating temperature increases.

PTC thermistor for overload & over-current protection are employed in the over-current overload and short circuit protection of transformers, battery charger, switches, switch power supply, adaptor, meter, instrumentation, apparatus, electronic coils, control panels, air conditioner, automotive electron, etc. In contrast to conventional fuses, PTC thermistor resettable fuses do not have to be replaced after elimination of the fault but resume their protective function immediately after a short cooling-down time.

Manufacturer/supplier's information

Company name:		AMWEI Thermistor Co., Ltd. [ Homepage ]
Business address:		1205, Jidian Zonghe Builiding, No. 32, Meilin Road, Futian, Shenzhen, P.R China.
Zip/postal code:		518000
Telephone number:		86-755-26570111
Fax number:		86-755-26571122
Contact name:		Rosa [ Email ]

---

Product groups: Thermistor

---

Other products from this member

---