 |
 |
You're here: Electrical & electronic components > Transformer > Electronic transformer > Oil-immersed Electric Transformer
Oil-immersed Electric Transformer
This manual is application to our company 35KV (or below 35KV) load andall kinds of oil-immersed power transformer.
GB1094.1～2-1996 “Power Transformer”
GB1094.3,.5-2003 “Power Transformer”
GB/T6451-1999 “Pecification and technical requirements for three
phase oil immersed power transformers”
This transformer can use in the following conditions, if it is not, please inform
the manufacturer before order.
Above Sea Level not exceeding than 1000m
Ambient temperature: highest temperature +40℃,minimum temperature －25℃；
Relative air humidity: =90%(+25℃)
The wave shape of the power supply voltage should near to the sine wave
The power supply voltage of the 3P transformer should be symmetry
Without any serious impact on transformer, such as insulated gas, steam ,
chemical deposit, dust and others explosibility and causticity medium in the
installation place .
The installation place without any oscillate and bump.
Please checking the right type from the nameplate when you received
the transformer.
Please checking all of the technical document, drawing according to
technical document list from the factory ;
Please checking the accessories quantity of transformer according to
technical document list from the factory
Please checking the accessories with any broken or not.
Easily damaged parts :(bushing, thermometer, oil level gauge,
dehydrating breather, gas relay , temperature controller)
The transformer without oil leakage,and you can see the oil in the oil level
gauge or not.
Manufacturer/supplier's information
| Company name: | JUBANG ELECTRIC CO.,LTD. [ Homepage ] | |
| Business address: | Xinguang Industrial Zone, Liushi, Wenzhou, Zhejiang, China | |
| Zip/postal code: | 325604 | |
| Telephone number: | 0086-577-62799786 | |
| Fax number: | 0086-577-62799771 | |
| Contact name: | Ms.Joan [ Email ] |
Product groups: transformer
Other products from this member
ZN63A-12 Indoor AC HV Vacuum Circuit Breaker
ZN63-12(VS1) Indoor AC high voltage vacuum circuit breaker series in the power system of three-phase AC, 50Hz and 10 kV to function as switching different kinds of leads or the loads needing frequent operation, and can protect and control electric equipment in the industrial & mineral enterprise, power plant and substation as well. It can coordinate with the KYN28A-12(GZS1) middle-arranged manual-driven switchgear or XGN-fixed switchgear as well. Standard: IEC60056, GB198489, JB3855, DL/T403
GTW88 Air Circuit Breaker (DW45)
GTW88 series intelligent air circuit breaker is applicable for distribution network of AC 50Hz, rated voltage of 400V and 690V, and rated current of 630A -3200A, to distribute electric energy protection circuit and prevent power equipments from harm of overload, under-voltage, short circuit and single-phase earth etc. Provided with intelligent protecting function and precise selective protection, breaker can enhance the dependability of power supply and avoid unwanted power cut.
Mini Circuit Breaker
DZ47(C45N) DZ47 (C45N) series circuit breaker is used in lighting distribution system or motor distribution system for protecting overload and short-circuit in the system. The product is novel in structure, light in weight, reliable and excellent in performance.
Other products at Electrical & electronic components > Transformer > Electronic transformer
Electric Transformer & Inductor
Epartskey provides electric transformers&inductors according to customers' application and design. To use for circuit board or other electric transformer needs. All parts are fabricated to exacting standards; all are easily assembled; all are in stock.
Ads