You're here: Electrical & electronic components > Electronic filter > EMI/RFI shields > Monex - expanded monel foil
Monex - expanded monel foil
The material cannot be effectively joined so gaskets should be cut in one piece wherever possible. Thicknesses of 0.5mm and 0.75mm are available and it can be supplied in sheet form.To retain the strength of the foil, we recommend that a minimum land-width of 3mm should remain at any point around the edge of a Monex gasket. We also suggest that gaskets with intricate outlines are diecut at the factory.
Applications
Like Aluweave, Monex is used for connector gaskets and other 'thin' gasket applications. Mating surfaces should ideally be within ± .05mm. Where hermetic sealing is not necessary, Monex - NF is available without the silicone filler.
Monex gaskets provide good 'point contact', while the rubber filler ensures excellent environmental sealing. Monex, like nearly all other conductive gasket materials, should not be fixed with a conductive or pressure sensitive adhesive and should be fixed as a friction fit utilising the fixing screws to position the gasket before tightening.
Manufacturer/supplier's information
| Company name: | P & P Technology Ltd [ Homepage ] | |
| Business address: | Finch Drive, Springwood, Braintree, Essex, United Kingdom |
|
| Zip/postal code: | CM7 2SF | |
| Telephone number: | 01376 550525 | |
| Fax number: | 01376 552389 | |
| Contact name: | Gerry Steel [ Email ] |
Product groups: EMI shielding
Other products from this member
Aluweave - versatile gaskets
Aluweave is a versatile, highly conductive gasket medium produced by filling a woven aluminium mesh with either silicone, flurosilicone or neoprene rubber. It is particularly useful where thicker gaskets are unsuitable but, because it is woven, it is unsuitable for 'landwidths' of less than 3mm for diecut gaskets. Surface irregularities should not exceed 0.05mm.
Edge bonded shielded windows
A low cost range of windows offering the same high level of EMI shielding performace as our range of fully laminated windows (WF Series) but with edge lamination only.
Airfilters with dustfield
Our VF Series of RFI vents combine the benefits of an attenuation vent panel with the properties of a dustfilter in a single frame, unlike the VB Series which utilises separate units fixed together in-situ.
Silshield - Oriented wires in silicone
Our S Range silicone rubbers combine excellent environmental protection with a high level of shielding effectiveness. These products incorporate a matrix of vertically oriented wires which pierce both flat faces of the elastomer and provide around 100 contact points per square centimetre.
Shielded windows
Fully laminated (WF Series) screened windows combine the physical strength and optical clarity of laminated glass or plastic with the shielding effectiveness of fine wire gauze.
Connector Gaskets
P & P Technology manufacture a wide range of connector gaskets, including precision diecut gaskets made from a selection of materials, both conductive and non-conductive. Gaskets can be tailor made to meet individual requirements.
Knitted mesh with carrier
Our KM series gasket strip and frame materials consist of a slotted aluminium extrusion carrier into which a solid or elastomer cored knitted mesh gasket is clamped. These ready-to-fit, semi-rigid gasketing profiles help to avoid the problems often encountered when fitting adhesive-backed or plain mesh gaskets.
Conductive adhesive
The one-part conductive particle filled room temperature curing silicone rubber adhesives is available using standard silicone and flurosilicone base compounds combined with a selection of particle fillers to produce a readily extrudable paste which self-cures when exposed to atmospheric moisture.
High performance RFI vents & filter composites
P & P Technology's VP Series of honeycomb ventilation panels can be custom manufactured from steel, brass or stainless steel. When selecting the material, corrosion resistance relevant to the application environment should be considered along with the attenuation requirements.
Attenuation vents
P & P Technology's VH Series of lightweight aluminium honeycomb attenuatung ventilation panels comprise of forms of conductive airflow media retained within an aluminium extrusion. They are designed for use in racks and other forms of commercial enclosure.
Conductive silicone
Our E Range gaskets are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity.
Elastomer-cored knitted wire meshes
P & P Technology's KE Series elastomer-cored knitted wire meshes consist of two layers of knitted wire over a low-closing-force rubber or elastomer core and offer the same shielding effectiveness of all-mesh types.
Fully laminated windows
Fully laminated screened windows combine the physical strength and optical clarity of laminated glass or plastic with the shielding effectiveness of fine wire gauze.
Vent/filter composites
P & P Technology's VB Series of EMC vents / filter assemblies are composites of the VH Series honeycomb attenuation vents and demountable dustfilter panels containing a demembraned polyurethene filter media.
Twinstrip knitted or cored mesh gaskets
Twinstrip is a combination of knitted or cored mesh gasket with a non-conductive environmental seal. The wire mesh types used are Monel, Aluminium, TCS and Stainless Steel and the permutations of wire and elastomer combinations are almost endless providing a wide range of environmental, water, dust and pressure seals.
Other products at Electrical & electronic components > Electronic filter > EMI/RFI shields
Silshield - Oriented wires in silicone
Our S Range silicone rubbers combine excellent environmental protection with a high level of shielding effectiveness. These products incorporate a matrix of vertically oriented wires which pierce both flat faces of the elastomer and provide around 100 contact points per square centimetre.
Attenuation vents
P & P Technology's VH Series of lightweight aluminium honeycomb attenuatung ventilation panels comprise of forms of conductive airflow media retained within an aluminium extrusion. They are designed for use in racks and other forms of commercial enclosure.
Knitshield KP Series Knitted Mesh
Knitted wire meshes are produced from a single continuous filament and produce very high levels of EMI shielding performance when evenly compressed between two metallic contact surfaces.
High performance RFI vents & filter composites
P & P Technology's VP Series of honeycomb ventilation panels can be custom manufactured from steel, brass or stainless steel. When selecting the material, corrosion resistance relevant to the application environment should be considered along with the attenuation requirements.
Connector Gaskets
P & P Technology manufacture a wide range of connector gaskets, including precision diecut gaskets made from a selection of materials, both conductive and non-conductive. Gaskets can be tailor made to meet individual requirements.
Our partner