You're here: Industrial automation equipment > Data acquisition system > Data logger > MEphisto scope
MEphisto scope
Robust, mobile 16 bit multifunctional instrument, scope and logger for USB 2.0. 7 measurement instruments in one!This multifunctional instrument includes a 16 bit digital storage oscilloscope, a spectrum analyser with FFT, a volt meter, a logic analyser, a data logger and a digital switchbox with 24 I/O lines. The instrument has a very robust metal housing: It is a device you can rely on - even in rough, mobile applications as for example in maintenance, service and education. With its low power consumption, the MEphisto is the ideal solution for mobile applications with notebooks. Lots of DAQ know-how is integrate directly into the software's online help.
Features:
* Robust, compact USB module with 7 instruments in one.
* Additional function of the UM203: Offline/stand-alone logging. Data logging on SD memory card, independent from PC (a 256 MB SD card is included).
* UM202 doesn't require an external power supply. It is powered from the PC via USB. It has a very low power consumption which makes it an ideal solution for battery powered notebooks: Ultra low power 0.85 W. UM203 is powered by a external power supply (included) in offline/stand-alone mode.
* 16 bit resolution. 1 MS/s sample rate, up to 2x 1 MS/s simultaneous sampling. Analog bandwidth 1 MHz. Value memory 256 kS.
* Solide, reliable metal housing.
* BNC connectors for reliable connectivity of standard probes.
* ±300 VDC over voltage protection.
* Multiple trigger modes: Threshold, windows, edge, dV/dt, external, manual.
* USB 2.0 full-speed (USB 1.1 compatiblel). USB cable incl.
* Easy-to-use Windows software with panels for all 7 devices. Easy programming also with VEE Pro etc.
Highlights:
* Oscilloscope: 2 channels, 1 MS/s per channel, 16 bit, up to 500 kHz, Range 200 mV...20 V. Time, spectrum and XY mode.
* Volt meter: 2 channels, input range ±100 mV, ±1 V, ±10V. 16 bit. Pointer display (software). DC, AC true RMS.
* Data logger analog and digital: Up to 100 kHz.
* Logic analyser: 16 channels, up to 100 kHz, CMOS level.
* Digital I/O switchbox: 24 TTL lines, each line programmable as input/output. Expandable with optional accessory ME-UB with relays or opto-isolation.
* Model UM203 - stand-alone data logger: Logging of analog as well as digital data on SD card. 256 MB SD memory card included. Up to 100 kS/s (depending on SD card type). The module uses the latest settings which were made online from a PC, when the module gets connected to the external power supply. Measurement/logging is started by inserting the SD card. To read out the SD card, an optional card reader is required (or use a standard card reader
* integrated in PCs or available as PC accessory).
Multifunctional instrument and stand-alone logger
Now you can also use the new version of the MEphisto Scopes (UM203) as a stand-alone data logger: First connect to a PC via USB for easy confi guration, then let the device collect data independently from your PC. A slot for SD memory cards is located on the back side of the device, 256 MB are included. Read out the measurement data via USB or a standard card reader later on.
* Same basic functions as MEphisto Scope (UM202): 5 instruments in one - scope, volt meter, logic analyser, data logger analog/digital, digital switchbox.
* Additional offl ine/stand-alone logging function: Data storage on SD memory card, independently from a PC.
* 256 MB SD memory card included.
* External power supply included.
* Recording of analog (volt meter and logger) or digital data (logic analyser and logger).
* Confi guration and read out via USB with the extended MEphisto Lab software.
* Robust, small and compact USB module.
* Up to 100 kS/s (depending on SD card).
MEphisto complete
If you are looking for a USB multifunctional instrument and if you are "on the road" a lot with your notebook, then you should take a closer look at the complete MEphisto Scope kit. Probes are included, and for the new version UM203, the power supply also fi ts in the case. The ideal solution for storing your scope or using in the fi eld in mobile service and maintenance.
Included:
* Carry case for the MEphisto Scope.
* Robust USB module MEphisto Scope UM202 or UM203.
* CD with MEphistoLab software, instruction for use.
* 26-pin D-sub counter connector.
* USB cable.
* Passive pair of probes ME-Probe LF Pair (x1/x10. Bandwidth 15/150 MHz, 47/15.5 pF, 1/10 MΩ. 600 Vp CAT I. BNC).
* Additional for UM203: Power supply, 256 MB SD memory card. On request we also offer kits with ME-UB boxs - they expand the digital channels with relays or opto-isolation.
Manufacturer/supplier's information
| Company name: | Meilhaus Electronic GmbH | |
| Business address: | Fischerstraße 2 82178 Puchheim Germany |
|
| Zip/postal code: | 82178 | |
| Telephone number: | +49 089 8901660 | |
| Contact name: | Peter Mathes [ Email ] |
Product groups: Data acquisition DAQ data logger oscilloscope spectrum analyzer
Other products from this member

ME-Synapse intelligent DAQ interface
The intelligent DAQ interface is a robust, professional industrial solution for DAQ and control with USB or Ethernet/LAN. Just install your ME DAQ board, connect to USB or Ethernet, install driver and start measurement!
Other products at Industrial automation equipment > Data acquisition system > Data logger

LogTag temperature data recorder
The LogTag temperature recorder provides the most cost effective, high performance temperature data logging system available for today's market.
Lascar Easylog USB temperature logger
The temperature data logger features protection against water and dust to IP67 standards when the cap is fitted, user selectable sampling rate and start time and direct usb connection to PC for downloading of data.

Our partner