computer hardware, consumer electronics, electronic components
You're here: Power supplies > UPS power supply > Medical grade power conditions UPS

Medical grade power conditions UPS


Medical grade power conditions UPS The ONEAC ON Series m UPS is designed to help medical electronic equipment meet the strict industry standards required to keep patients and medical personnel safe. The ON Series delivers a clean electrical connection resulting in fewer system interruptions and hardware failures.

Medical electronic equipment must meet strict electrical safety standards developed to protect the people and patients in these environments. ON Series UPSs help manufacturers meet these standards and provide a clean electrical environment to ensure attached equipment has fewer system interruptions and hardware failures. This maximizes patient safety and the performance of patient contact equipment such as ultrasound, patient monitoring and clinical information systems. The robust design of an ONEAC UPS is impervious to the harshest electrical environments. Designed and manufactured under ISO 9001 quality procedures, ON Series m UPSs are exceptionally reliable. With an average mean time between failures more than twice as long as leading competitors.

ONEAC's unique power conditioning architecture provides superior protection against the full range of power line disturbances. ONEAC's proprietary transformer designs provide superior protection against lightning and other high energy surges. The secondary winding acts as a separately derived power source, thereby single or multiple loads with high earth leakage currents connected to the UPS have their earth leakage limited to that of the transformer. Typically less than 100uA. Eliminates the full spectrum of conducted power line noise (from 50 kHz to 10 MHz) in all modes, reduces the effect of electrostatic discharge (ESD) and provides an exceptionally clean, signal reference ground for electronic systems. Basic mode provides standard signals recognized by ONEAC MopUPSฎ or UPS monitoring software supplied with Windows NT, NetWare and Banyan operating systems. Basic mode provides power fail and low battery signals for unattended system shutdown. It also receives inverter-off command to save remaining battery charge.

The ON Series' premium quality batteries are thermally isolated for life and employ unique charging circuitry designed to speed recovery and minimize stress on the batteries. Also, ON Series' batteries are automatically monitored and designed for rapid replacement so power is never interrupted. The ON Series m durability is backed by a five year warranty.

Product Features:
• Global Certifications: UL2601/EN60601-1/CSA 22.2 listed
• Full-time, on-line isolating transformer: eliminates power contaminants
• ONBoostฎ: compensates for line sags and brown-outs, conserves batteries
• On-site, on-line replaceable battery: minimizes cost and downtime
• Separately derived power source: leakage current of the equipment, measured at the UPS line cord, is in compliance with UL2601.
• Automatic self-test: ensures battery and system readiness
• 5-year warranty: the best assurance of product quality and performance in the industry
• Free 24-hour technical support

Product Specifications:
• Nominal input voltage: 120 VAC, 50/60 Hz or 230 VAC, 50/60 Hz
• Surge voltage withstand capability: ANSI/IEEE C62.41 Category A&B, 6 kV/200 & 500 Amp, 100 kHz ringwave
• Surge voltage let-through (max): Less than 10 V Normal mode (L-N), less than 0.5 V Common mode (N-G) when subjected to 6 kV ANSI/IEEE C62.41 Cat. A
• Normal & common mode clamping response time: Instantaneous
• Transfer time (typical/max): 4/6 milliseconds
• On-battery output voltage: Pseudo sine wave
• ONBoost: Approximately 10% voltage boost to output voltage when input voltage falls below 80% of nominal
• Load power factor range (crest factor): UPS .65 to 1.0 (3) — will support loads rated 0.5 to 1.0 (<5)

productsManufacturer/supplier's information


Company name:   H.M. Cragg Co. [ Homepage ]
Business address:   7674 Washington Ave. South
Eden Prairie, MN, USA
Zip/postal code:   55344
Telephone number:   952-884-7775
Contact name:   Stephanie [ Email ]


Product groups: UPS   uninterruptible power supply

sponsoredOther products from this member










sponsoredOther products at Power supplies > UPS power supply








Category Navigation :

 Our partner