 |
You're here: Sensors, transducers, detectors > Liquid level sensor > Liquid level switch
Liquid level switch
Elixir is a low power consuming level switch which can measure the level of any liquid with viscosity of up to 10000 cP. The instrument can stand a high temperature of 200 degree C in the process plant. The Elixir liquid level control switch has no moving parts and is not affected by the turbulence in the tank, floating particles, suspensions or gas bubbles. This makes it a superior choice over the traditional float switch based level indicators.A vibrating fork operates at a user set frequency which changes when the liquid immerses the tines of the fork. The evaluation unit senses this change in frequency and a relay is established. Can be used for transmission and control. This single point level switch for liquids uses the RISC Core micro-controller technology which makes it reliable & more accurate for level detection of any liquid or slurry (even highly viscous up to 10,000 cP). The instrument has an adjustable switching delay for covered and uncovered conditions. The electronics is integral with the fork and can be mounted in different ways such as wall/back panel mounting or remote mounting. If the use is in hazardous area, you could choose the flame proof version. You also have the flexibility of choosing the insertion length.
Elixir is used in power plants, chemicals plants, sugar plants, and steel plant and literally anywhere as a better and safe option for liquid level indication as compared to the float switches. Elixir is suitable for most of the applications, where traditional float switches were previously used and for liquids, which are sticky, corrosive, agitated, splashing and foaming. Elixir has well used in the food, power, chemicals, sugar, detergent, steel, minerals, textile and many other industries. Anywhere you use a float operated switch for liquid level indication, Elixir level switch comes as a better solution.
If the liquid/slurry service material is very viscous, Elixir IS the instrument of choice. The instrument neither requires adjustments nor is dependent on the position, thus making it the best option for liquid level indication in small tanks, pipes and mixing tanks. A specially shaped tuning fork is kept vibrating by piezo-electric elements at a set frequency. The frequency of the fork changes when the tines are immersed in the liquid. The change in the frequency is detected and used for switching a relay. The output contacts of the relay can in turn be used for annunciation or control.
Manufacturer/supplier's information
| Company name: | Sapcon Instruments [ Homepage ] | |
| Business address: | 131, Palshikar Colony, Indore - 452004 (M.P.) India | |
| Zip/postal code: | 452004 | |
| Telephone number: | +91-731-4085751 | |
| Contact name: | Ashwin Palshikar [ Email ] |
Product groups: Switch liquid level switch
Other products from this member
RF admittance level switch
Highly reliable and accurate set of level monitoring instruments that eliminates cable capacitance and drift which happens due to change of cable capacitance with temperature.
SLW - water level indicator
This water level indicator can be used for pump switch on and off, to prevent dry running of pumps and for preventing overflow of service material in the process plants.
Elixir liquid level sensor
Elixir is a tuning fork based level sensor for liquids where the fork is kept in mechanical vibration at resonance frequency by piezo crystals. When the tines of the fork are immersed in liquid, the frequency changes which is sensed electronically and processed signal is used for switching.
Other products at Sensors, transducers, detectors > Liquid level sensor
Horizontal Float Liquid Level
Three new versions of Level Sensor Series LS03 have been introduced into the market to meet the wider demands of our customer's more specialized application needs. Thus far, the LS03 Level Sensors were only capable of mounting to the inside of the liquid container or reservoir. These level sensors can be externally mounted to devices such as in modern air conditioners, cooling devices, high-pressure cleaners and many other technologically advanced household appliances.
Low Cost Multi Liquid Level Sensor
The LS04 Liquid Level Sensors are a versatile multi-point level sensor made of plastic which can be customized to hold up to 6 magnetic floats and mount to either the top or bottom of a tank using various mounting options. The LS04 housing tube comes in two different plastic options, Polyamide (PA) and Polypropylene (PP) and standard lengths ranging from 80mm [3.14"] to 250mm [9.84"].
Stainless Steel Liquid Level Sensors
The LS05 Liquid Level Sensors reach new levels. Made of a tough stainless steel housing, these sensors can be customized up to 6.5 feet in length, detect countless liquid levels and withstand high water pressure and high temperatures up to 200°C. The LS05 Series Liquid Level Sensors is the most diverse level sensor yet, combining hundreds of standard options ranging from switching power and connectivity to fluid types and number of liquid levels.
Miniature Liquid Level Sensors
A new line of compact liquid level sensors that are more reliable than mechanical switches and are an alternative to costly Hall effect sensors is being introduced by MEDER electronic. MEDER LS-Series Liquid Level Sensors are made from corrosion-resistant materials and feature magnetic floats which activate reed switches when the liquid level rises or falls, as desired, and then provides an output signal. Requires no external power to operate.
Diffusive silicon level transmitter
Series liquid level transmitter is the extension and development of pressure transmitter which is based on the principle that pressure generated by liquid with different specific gravity at different height are linear to realise the accurate measurement and transmission of volume, level height and weight of water, oil and pasted matters.
Ads