 |
You're here: Sensors, transducers, detectors > Liquid level sensor > Horizontal Float Liquid Level
Horizontal Float Liquid Level
Three new versions of Level Sensor Series LS03 have been introduced into the market to meet the wider demands of our customer's more specialized application needs. Thus far, the LS03 Level Sensors were only capable of mounting to the inside of the liquid container or reservoir. The demand for level sensors which can be externally mounted has progressed as more and more sophisticated devices are being developed such as in modern air conditioners, cooling devices, high-pressure cleaners and many other technologically advanced household appliances. Moreover, external mounting also allows manufacturers the flexibility of quick and low cost level sensor repair or replacement.
MEDER electronic has quickly responded to the new demands of the American and European markets with the expanded LS03 versions LS03/DL, LS03/DK, and LS03/GZ. Available in PP (Polypropylene), PA (Polyamide), or both, these new versions also range in sealing and wall thickness, thread size, and filling pressure capacity. Furthermore, these LS03 versions can accommodate maximum switching voltages between 200VDC and 1000VDC with contact ratings ranging from 10W-100W.
LS03/DL: Material-PA or PP | Thread-Metric M16 x 2.0 | Insertion hole- Dia. 22-24mm | Wide Seal-12mm | Low Pressure Filling | Wall thickness-Max. 5mm
LS03/DK: Material-PA or PP | Thread-Metric M16 x 2.0 | Insertion hole- Dia. 22mm | Narrow Seal-5mm | High Pressure Filling | Wall thickness-Min. 4mm
LS03/GZ: Material-PA only | Thread-Tapered 1/2" | Insertion hole- Dia. 1/2" | Self Sealing-Tapered thread
The DL version, developed for the European market, is used with thin walled containers and handles low pressure filling while the DK version with its robuts construction can handle higher filling pressures up to at least 10bar. The GZ version, used in American markets, is self-sealing as a result of its tapered thread therefore is has a lower cost as compared to the DL and DK models.
MEDER LS03 Series Liquid Level Sensors feature magnetic floats which activate reed switches when the liquid level rises or falls, as desired, and then provides an output signal. Available in Form A and Form B contact types, these magnetically-operated, hermetically sealed proximity switches require no external power and handle switching voltages up to 400 VDC.
Designed for horizontal mounting in tanks, MEDER LS03 Series Liquid Level Sensors are available in two versions: polypropylene for use in water and dilute acids and polyamide for use in oil, gasoline and brake fluid. Supplied complete with shaft, nut, float, and nitrile seal, these compact sensors can be ordered with a variety of standard and custom terminations.
MEDER LS03 Series Liquid Level Sensors are priced depending upon version and quantity. Literature and pricing are provided on request.
Level Sensor with Magnet Floats Description Standard liquid level sensor. The sensor is especially designed for lateral installation in tanks so that it has to be mounted horizontally for precise function.
Two versions are available:
PP (Polypropylene) for water applications and dilute acids. PA (Polyamide) for use in oil, gasoline (petrol) and brake fluid.
The standard termination is a PVC round-cable with a cross section of 0.14mm² and a length of 500mm. The cable can be modified on request.
APPLICATIONS
Liquid container monitoring in: Household appliances Automotive applications Test and measurement Control industry
Features
High power switches available Other cables, connectors and colors available Form A (normally open) and Form B (normally closed) types are available
Manufacturer/supplier's information
| Company name: | MEDER electronic [ Homepage ] | |
| Business address: | 10 Little Brook Rd, West Wareham, MA | |
| Zip/postal code: | 02576 | |
| Telephone number: | 508-295-0771 | |
| Fax number: | 508-295-0733 | |
| Contact name: | Julie Dargie [ Email ] |
Other products from this member
Reed Switch Series KSK and OKI Reed Products
MEDER electronic offers the largest selection of Reed Switches ranging in size from 4mm-52mm in a whole host of contact and power configurations. MEDER is the world's largest OKI Reed Switch source proving solutions for all your standard and custom switching needs. MEDER electronic has a switch for just about every type of switching needs including custom switch lead lengths and forming for PCB or other special mounting requirements.
Double Pole Micro Single IN Line Relays
The 2-Pole Micro SIL expands the MS Series Reed Relays MICRO SIL Reed Relays are a single-in-line Reed Relay using only 15.11 x 3.81 mm of board space which is half the standard SIL requirement. They are used as voltage relays and are designed for pick-and-place assembly equipment, allowing close placement on PC boards. MEDER MS Series Micro SIL Reed Relays are rugged and highly uniform for use with high speed pick-and-place assembly equipment and feature an internal magnetic shield which allo
Miniature 7 GHz RF Reed Relay CRF Series
The CR series is our smallest and most versatile instrument grade reed relay series. The CRF Series has a flat insertion loss curve from DC up to 7 GHz, attained by keeping the signal path as short as possible and using an internal coaxial shield with a consistent 50 Ohm impedance path. Not only is it excellent with RF signals, but is also great for digital signals where the skew rates or effects on the rise time of fast digital pulses is less than 40 picoseconds through the relay.
MK02 Ferromagnetic Proximity Sensor
A new series of patented ferromagnetic proximity switches that operate in the presence of a ferrous metal, rather than requiring actuating magnets, is being introduced by MEDER electronic. MEDER MK02 Series Ferromagnetic Metal Detection sensors are single component devices, which sense magnetically conductive materials directly without the need for two separate magnet and sensing elements.
Dual In Line Reed Relay Sereis
A full line of molded reed relays offered in dual-in-line package for a wide variety of test and measurement, telecommunications, and security equipment applications are available from MEDER electronic. MEDER DIP Series Molded Reed Relays feature high voltage versions in 1-Form-A, 2-Form-A, 1-Form-B, and 1-Form-C packages. Providing high resistance coils up to 2000 W 12 VDC, with up to 4.25 kVDC breakdown voltage, DIP are offered with an internal diode and magnetic shields.
3 Line Sensing Reed Relay Series
The CL ,DIL-CL and NP-CL series are used for line sensing in telecommunication devices. These reed relays are superior to electronic solutions regarding flashover and impulse strength. Versions with low coil resistance values down to 4 Ohm and pull-in current
Surface Mount Reed Switches
MEDER electronic's MK23 Series Reed Sensors have expanded with the addition of our new MK23-90 Reed Sensor. The MK23- 90-C-2 is a Single-Pole Double-Throw switch with a 14mm glass body. This SPDT (Form C) surface mount sensor comes in two lead designs, lead design 1 (straight cut axial lead) and lead design 2 ("Gull Wing" with coined bent leads). The MK23-90 sensor comes in 5 contact sensitivity ranges.
1.5GHz RF MIcro Single In Line Reed Relay
Quests for smaller and smaller designs in connection with fast microprocessors set continuing challenges to relay manufacturers. To fulfill these quests, MEDER has expanded the MS Series for applications with higher frequency. The new MSRF05-1A87-75L is a Reed Relay designed in a miniature single-in-line package measuring 15.2mm x 3.8mm x 6.8mm (L x W x H). This new package size takes up half the space of a conventional reed relay.
Miniature Liquid Level Sensors
A new line of compact liquid level sensors that are more reliable than mechanical switches and are an alternative to costly Hall effect sensors is being introduced by MEDER electronic. MEDER LS-Series Liquid Level Sensors are made from corrosion-resistant materials and feature magnetic floats which activate reed switches when the liquid level rises or falls, as desired, and then provides an output signal. Requires no external power to operate.
LP Series 1 GHz RF Reed Relays
1 GHz REED RELAYS RATED FOR ONE BILLION OPERATIONS A full line of electrostatic- and coaxial shielded reed relays that come in several versions for use in OEM and aftermarket ATE test equipment is being introduced by MEDER electronic. MEDER LP-Series Reed Relays are designed for 1 GHz applications and feature compact metal cases with hermetically sealed contacts. Rated for one billion operations, these magnetically-shielded devices provide 1012 ohm insulation resistance. 5, 12, & 24VDC
7 Surface Mount Proximity Sensor Series
Seven series of compact surface mount reed sensors that require no external power for detecting movement and fluid levels in consumer products such as coffee makers, and automotive, medical, security, and telephone hook switch applications are sealed in a rugged thermoset molded package. MEDER SMD Reed Sensors are magnetically operated proximity sensors used to detect movement.
Stainless Steel Liquid Level Sensors
The LS05 Liquid Level Sensors reach new levels. Made of a tough stainless steel housing, these sensors can be customized up to 6.5 feet in length, detect countless liquid levels and withstand high water pressure and high temperatures up to 200°C. The LS05 Series Liquid Level Sensors is the most diverse level sensor yet, combining hundreds of standard options ranging from switching power and connectivity to fluid types and number of liquid levels.
Threaded Mount Proximity Sensors
The MK11 Series offers sensor mounting convenience with its built-in threaded portal. Used in limit switching, end position, and proximity switching applications, these MK11 Reed Sensors are offered in plastic, stainless steel, and now a new brass version. This new brass version of our MK11 is more robust and resilient to harsh conditions. They are an affordable and excellent choice for all applications requiring flexible sensing adjustment and multiple switching options.
Low Cost Multi Liquid Level Sensor
The LS04 Liquid Level Sensors are a versatile multi-point level sensor made of plastic which can be customized to hold up to 6 magnetic floats and mount to either the top or bottom of a tank using various mounting options. The LS04 housing tube comes in two different plastic options, Polyamide (PA) and Polypropylene (PP) and standard lengths ranging from 80mm [3.14"] to 250mm [9.84"].
KSK-1A04 4mm Reed Switch Series
KSK-1A04 Series Reed Switches are magnetically actuated, ultraminiature, low power reed switches. Designed with flat lead terminals they provide consistent contact orientation and larger contact soldering surface in SMT applications. KSK-1A04 Series Reed Switches, at 4mm in glass size are currently the smallest reed switch offered by MEDER electronic and the world's smallest reed switch with flat contact terminals.
Flange Screw Mount Proximity Sensors
REED SENSORS REPLACE MECHANICAL SWITCHES The Rectangular Flange Mount Reed Sensors offer billions of reliable switching operations in wet and dirty applications. These magnetically operated reed proximity switches are waterproof and can be mounted almost anywhere, making them suitable replacements for mechanical switches. MEDER's Reed Sensor series MK02, MK04, MK05, MK09, MK12, MK13 and MK21 are magnetically operated reed proximity switches constructed in hermetically sealed packages.
High Voltage Single In Line Relay
Miniature SIL HV Series High Voltage/High Current Reed Relays in an epoxy sealed, single-in-line package measuring only 24mm x 6.4mm x 8.9mm. An optional offset pin-out measuring 29mm x 6.4mm x 8.9mm is also available. Standard coil selections include 5 or 12 volts with or without diode suppression. This series can switch up to 1000 volts and carry up to 5 amps for up to 50 milli-seconds at a consistent repetition rate or 10A pulse
Custom Value Add Proximity Sensor Products
Magnetic Reed Switches can be customized for your design needs. Some customization includes sorting specific magnetic sensitivity pull-in ranges and cutting and/or bending the Reed contact leads for either horizontal or vertical surface mount applications or other special mounting requirements. Proper handling and manufacturing technique as well as specialized equipment are essential to producing high quality Reed Products.
5-Pole High Voltage Relays
Miniature High Voltage Reed Relays In the modern world, there is a constant drive to reduce size yet increase the performance of almost every type of electronic component. With that in mind, MEDER electronic has introduced two new high voltage Reed Relays for PCB mounting. These miniature high voltage relays take up only 40x15x13.5mm board area. These high voltage relays offer a switching voltage of 1 kVDC with a 4 kVDC or 6-kVDC option across the contacts.
Ultra Mini High Performace Proximity Sensors
MEDER electronic's MK24 series Reed Sensors achieve a minimum life expectancy of 50 million operations at 5V, 5mA, 100Hz while measuring only 5mm x 1.8mm x 2.2mm. At 50 millions operations, the MK24's base reed switch, a 4mm KSK-1A04 unequivocally surpassed all other reed switches in its size class. The MK24 reed sensor is a hermetically sealed switch in a robust thermoset molded package. This tiny energy saving device requires no external power to operate.
Other products at Sensors, transducers, detectors > Liquid level sensor
K11 liquid level sensor
K11 liquid and oil level sensor is suitable for high pressure applications like pressurized vessels, HVAC and refrigeration, motors, and more. K11 use infrared technology.
Liquid level switch
This liquid level indicator is based on the vibratig fork principle and has a built in microprocessor. The switch can be used to monitor the level of any liquid with viscosity up to 10000 cP.
SLW - water level indicator
This water level indicator can be used for pump switch on and off, to prevent dry running of pumps and for preventing overflow of service material in the process plants.
RF admittance level switch
Highly reliable and accurate set of level monitoring instruments that eliminates cable capacitance and drift which happens due to change of cable capacitance with temperature.
Diffusive silicon level transmitter
Series liquid level transmitter is the extension and development of pressure transmitter which is based on the principle that pressure generated by liquid with different specific gravity at different height are linear to realise the accurate measurement and transmission of volume, level height and weight of water, oil and pasted matters.
Ads