 |
You're here: Industrial automation equipment > Signal processing > Signal converter > Ethernet to RS-232 converter
Ethernet to RS-232 converter
PROPERTIESFunctioning on ETHERNET network- IEEE 802.3 standard,
10/100BaseT physical layer,
Connection Ethernet network via RJ45 connector
Baud rate 10/100Mbps (auto-sensing),
Full or half duplex (auto-sensing) operates mode,
Protocols : TCP, UDP, DHCP, SNMP, SSL/TLS, Telnet, Rlogin, LPD, HTTP/HTTPS, SMTP, ICMP, IGMP, ARP,
WWW sever implemented for converter configuration,
Configuration of net services according to user personal setting,
Static or dynamic IP address (added by DHCP server),
Diagnostics of serial and network port,
Encoded transmission: DES (56-bit), 3DES (168-bit), AES (128/256-bit),
Functioning in modes: virtual serial port, serial bridge TCP, serial bridge UDP,
RS232 interface signals: Rx, Tx, RTS, CTS, DTR, DSR, DCD,
Baud rate (bps): 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400,
Transparent for all protocols (defined with the specification of RS232 interface): MODBUS, DNP, PROFIBUS and other,
Any format of byte defined with the specification of RS232 interface,
Connection RS-232 network via DSUB-9 Mail connector,
External power supply 10 - 30 VDC stable min. 3W,
1kV= or 3kV= galvanic isolation between RS232 and ETHERNET interfaces and power supply,
Implemented protection against power supply reverse connection,
Casing compatible with DIN 43880 standard– mounting in typical electro-installation unit,
Casing adapt to rail mounting according to DIN35 / TS35 standard,
Casing dimensions (W x D x H) 52,8mm x 58mm x 90mm.
Manufacturer/supplier's information
| Company name: | CEL-MAR [ Homepage ] | |
| Business address: | Sciegiennego 219 KIELCE POLNAD |
|
| Zip/postal code: | 25116 | |
| Telephone number: | +48413621246 | |
| Fax number: | +48413610770 | |
| Contact name: | Andrzej Resztak [ Email ] |
Other products from this member
RS-232 to Current Loop Converter
M1020 isolated converter changes RS232 standard to Current Loop standard without interfere in sending byte format. It can be used to communicate with other distant device such as: PC, controller or cash register. M1020 doesn't require power supply from RS232 port for working, supports asynchronous data rate up to 38,4 kbps via two pairs of twisted pair cable.
Wireless Serial Server
The ADA-14110 wireless serial server transmitt data between devices equipped with the RS232 interface via the wireless network WLAN. The data transmission is without the interference into the format of transmitted data. The functioning in the Wi-Fi WLAN wireless network can be in the virtual serial port mode (port server), TCP and UDP serial gridge.
Other products at Industrial automation equipment > Signal processing > Signal converter
High Speed Ruggedized Ethernet-to-RS485/422/232 Interface Converter
M4164 Board unit converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from a standard LAN/WAN connection to a serial asynchronous data interface over RS232, or RS485/422 networks with a user selectable baud rate of up to 921,600 bps.
Ads