 |
You're here: Relays & switches > Emergency stop switch > Emergency Stop Button
Emergency Stop Button
E-Stop button uses a push-to-stop, twist-to-release mechanism to provide emergency stop actuation. This button provides a rapid way to disconnect the energy source of the device to protect the operator.On large, industrial machines, an emergency stop button is typically located on the control panel, and possibly needed in several other areas of the machine.
This device must be hardwired into your machine's power supply by a qualified electrician. For machines with greater than 120 VAC motors, motor magnetics are required to reduce the control circuit voltage to 115-VAC in order to comply with NFPA 79.
Optional mounting bracket available
Manufacturer/supplier's information
| Company name: | Lovegreen Risk Management [ Homepage ] | |
| Business address: | 2280 Sibley Court Eagan, MN |
|
| Zip/postal code: | 55122 | |
| Telephone number: | 651-707-9568 | |
| Contact name: | chuck oestreich [ Email ] |
Other products from this member
Lockable Disconnect up to 600 Volts
Provide a lockable disconnect to any machine. Make Lock Out/Tag Out/Try Out simple and safe. The disconnect operating handle is lockable in the off position only.
High Voltage Motor Control
Control up to 600 Volt motors with Start / Stop and latching emergency stop button. This device controls your machine's magnetic motor starter. If your machine does not have magnetics, you will need to contact an electrical contractor to install motor magnetics.
Other products at Relays & switches > Emergency stop switch
Zippswitch machine stop sensor
Machine Stop Switch utilizes Zippswitch Touch Strip Technology. Standard 4-wire is ideal for supervised monitored circuit for safety controller or safety PLC. The Machine Stop Switch has high visibility graphics and text that stands out. Standard width is 1" and lengths are available in 1 foot increments up to 20 feet.
Ads