 |
 |
You're here: Computer networking > Network switch > Dual channel RS530 Mode-S network switch, DB25 w/remote
Dual channel RS530 Mode-S network switch, DB25 w/remote
The PathWay® Model 7254 Dual Channel RS-530 Mode-S, AB Switch with DB25 Interface, Remote Control and Auto-Switching Functions allows the user two independent channels of A/B switch function. The A/B function permits data on input MPS ports from either of two devices connected to ports MPSA-IN and MPSB-IN, to stream through to output ports MPSA-OUT and MPSB-OUT, respectively. Only one position, A or B, may stream data at a time for each channel. This 2-position switch is controlled remotely from a device connected to its REMOTE port. The Remote port has a custom interface DB25 connector located o the rear of the unit. The switch position status is displayed on the front panel LEDs. There are no local control buttons on the unit. All position control is managed via the Remote port. The various status, monitoring and control signals present on this port allow the switch to be managed by a device capable of interpreting these signals and, based on these signals, issue control commands to be executed by the switch. The Model 7254 is configured to mount in a standard 19 inch equipment rack within 1U of rack space.Features:
The switched ports are transparent to all data.
The DTR / DCD lines of the RS530 interface are switched based on desired position, TXD, TXC are passed through the unit from IN to OUT at all times.
Channels 1 & 2 are switched independently.
Switch position is managed by the device connected to the Remote port, exclusively.
Switch data activity may be monitored via the Remote port.
Switch position can be interpreted / read by status pins that are part of the Remote port.
Front panel LEDs display the current switch position and power status.
Switches are latching and maintain their position during power loss.
Specifications:
Port Connectors: (8) DB25 (F) connectors, (4) for each channel, labeled MPSA-IN, MPSB-IN, MPSA-OUT, MPSB-OUT.
Power: UL approved wall mount 110/120VAC, 60Hz power module supplies 12 VAC, 500 mA to the unit.
Display: (4) LED's, (2) for each channel, labeled A and B. The LEDs indicate channel switch position and power status.
Remote Control: (1) DB25(F) connector accepts custom contact closure logic symbols.
Dimensions: Slim rackmount 19" W x 1.75" H x 8.0" D
Weight: Approximately 4.5 lbs
Manufacturer/supplier's information
| Company name: | Electro Standards Laboratories [ Homepage ] | |
| Business address: | 36 Western Industrial Drive Cranston, RI, USA |
|
| Zip/postal code: | 02921 | |
| Telephone number: | 401-943-1164 | |
| Fax number: | 401-946-5790 | |
| Contact name: | Tina Corticelli [ Email ] |
Product groups: Switch network switch
Other products from this member
M8463 9-Channel DB15 Connect / Disconnect Switch
Model 8463 Network Switch is comprised of nine individually controlled, manually operated DB15 Connect / Disconnect Switches that utilizes MIL components and is designed to support rugged MIL applications.
Cat 5 RJ45 100-base-T A/B switch
The PathWay® Model 7344 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
M9456 6-Channel RJ45 A/B Switch, T1, 1U Height, Rackmount
The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.
DB-9 A/B/C/D switch with exclusive remote control
This compact, desktop, network switch enables connection of a workstation or device between 4 other devices or networks. The switch ports are transparent to data format.
CellMite ProD 4328 strain gage
The CellMite ProD Model 4328 is a high performance data acquisition and strain gage interface module from Electro Standards Laboratories that is suitable for embedded applications that require high speed and high accuracy analog and digital data acquisition.
8-channel RJ45 A/B switch with redundant remote control & power supply
The Model 7237 8-Channel RJ45 A/B Switch with Redundant Remote Control and Power allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port.
Model 5534 Single Channel 4-State RJ45 Cat5e Network Switch
Model 5534 is a single channel 4-State OFF/SVCN/JSIS/GPCN RJ45 Cat5e Switch that is ideal for secure conference room communication applications and is manually operated by keylock.
Load cell smart indicator
The Model 4215A-204-1 Dual Channel Smart Indicator is an intelligent microprocessor based instrument designed for the measurement and control of strain gage transducer based systems.
Tri-Channel RJ45 Cat5 A/B Switch w/Remote
The PathWay® Model 7359 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's three channels.
RJ45 A/B/offline switch with keylock switching control
The Model 9065 network switch module allows the user to switch a device connected to the COMMON port between devices connected to ports A or B.
DB9 A/B switch with contact control remote
Model 7277 DB9 A/B Switch with Contact Control Remote allows the user the capability of accessing two separate devices, ports A and B, via connection through a device connected to the Common port.
ST duplex fiber optic mirror A/B switch
ST duplex fiber optic mirror A/B switch supports fiber optic wavelength of 850 nm and gigabyte data rate. Model 6273 uses mirror technology and can be accessed remotely by using DB9 RS232 Serial port.
Quad channel fiber optic A/B switch
QuickSwitch Model 6257 4-Channel Fiber Optic A/B Switch allows devices connected to COMMON port of each channel access to the A or B port of each channel. All channels are switched simultaneously.
High Speed Ruggedized Ethernet-to-RS485/422/232 Interface Converter
M4164 Board unit converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from a standard LAN/WAN connection to a serial asynchronous data interface over RS232, or RS485/422 networks with a user selectable baud rate of up to 921,600 bps.
QuickSwitch 6296 A/B/C/D Bypass Switch
QuickSwitch Model 6296 is a Single Mode, LC Duplex Fiber Optic Bypass Switch that supports connections between four sets of devices or peripherals, in two different switch positions, Normal and Bypass.
ST duplex fiber optic 8-position switch
The QuickSwitch 6275 ST Duplex 8-position fiber optic switch with Remote serial control allows the user to switch one Common ST Duplex port to any one of eight ST Duplex ports, or to be switched to an Off-Line position isolating all ports from each other.
Keylock video conference room secure switching system
Model 5150 Video Conference Room Secure Network Switching System passes the connection of copper and fiber voice and data lines from the conference room equipment to the building data network.
Tri-channel RJ45/BNC A/B switch
M8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B.
Remotely controllable network switch
The Model 7345 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
ST duplex fiber optic switch with remote Ethernet port and GUI
ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port allows the user to switch one Common ST Duplex port to any one of ten ST Duplex ports. The system affords local and remote access functionality. The Remote Ethernet Port allows for both Telnet and GUI remote control.
Other products at Computer networking > Network switch
DB-9 A/B Switch with RS232 Remote Control
Model 7200 DB9 A/B Switch with Remote Control via RS232 Serial port allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port of the switch.
Model 9474 Cat5e RJ45 A/B/OFFLINE Keylock Switch
Model 9474 is an RJ45 A/B/OFFLINE Keylock Switch that allows the sharing of one RJ45 Device among two others or the isolation of all ports by switching to OFFLINE position. Three RJ45 Ports (A, B, and Common) are deep recessed inside unit for security.
Cat5 10/100 Base-T Network Switch
The Model 9067 is ideal for government contractors and others who are looking for reliable, expandable, modular network switch systems. Up to 8 units can be housed in one Model 9025 rack.
USB Type-A, A/B Switch w/Remote Control
The PathWay® Model 4502 USB Type-A A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port of the switch.
6-channel RJ45 Cat 5 A/B switch with individual channel control
The Path Way® Model 7356 6-Channel RJ45 Cat5 A/B Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's six channels.
Ads