 |
You're here: Industrial automation equipment > Signal processing > Signal conditioner > Digital signal conditioner for strain gage sensors
Digital signal conditioner for strain gage sensors
Model 4337 CellMite Intelligent Digital Signal Conditioner for Strain Gage Sensors features an Auto Identifying Display. Model 4337 connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC, a scalable +/-10V analog output for interface to data acquisition systems, and a 16-character auto identifying display for direct reatout viewing. M4337 has on-board storage for 3 calibrated sensors.The CellMite Model 4337 Intelligent Digital Signal Conditioner features on-board storage for three calibrated sensors, each with integrated 6-point calibration and independent user-specified display setup parameters. When a TEDS-Tag capable sensor is connected to the unit, that sensor is immediately identified by the Model 4337 and its stored calibration data and display configuration are automatically loaded. If that sensor is removed and another TEDS-Tag sensor is connected, then its calibration data and display data are automatically loaded. Unlike other units in its class, auto sensor identification and auto display identification require no user intervention and prevent field personnel from making clostly mistakes due to incorrect sensor calibration or display setup. The CellMite Model 4337 can be fully operated with a computer or simply setup by a computer and then used as a stand-alone intelligent digital signal conditioner with auto identifying analog and alphanumeric display outputs. The CellMite's wide range numerical readout features 6 digits of display plus sign indicator and decimal point along with a unit of measure label and channel identifier. The Model 4337 automatically converts between a variety of scientific units including Lbs, Kg, In, cm, mm, and mV/V and can output these to the display. The location of the decimal point and unit of measure are setup via software but the computer is not required during operation. The Model 4337 has a multi-drop RS232/RS485 serial port that allows for connection of multiple units in a serial network configuration. This compact unit is ideally suited for in-situ transducer conditioning and distributed process measurements. It provides OEM users and system integrators with an affordable and complete strain gage-to-PC solution with intelligent display readout that is not found on competitive units.
Manufacturer/supplier's information
| Company name: | Electro Standards Laboratories [ Homepage ] | |
| Business address: | 36 Western Industrial Drive Cranston, RI USA |
|
| Zip/postal code: | 02921 | |
| Telephone number: | 401-943-1164 | |
| Fax number: | 401-946-5790 | |
| Contact name: | Jeannette Gouin [ Email ] |
Product groups: Digital signal conditioner
Other products from this member
High speed ruggedized fiber to USB interface converter
M4165 is a high speed ruggedized Fiber-to-USB interface converter. With its integrated rate buffering, the M4165 converts USB 2.0 compliant data from a standard PC to a serial asynchronous data interface over fiber with a user selectable baud rate of up to 3 Mbps.
RJ45 A/B/offline switch with keylock switching control
The Model 9065 network switch module allows the user to switch a device connected to the COMMON port between devices connected to ports A or B.
ST duplex fiber optic switch with remote Ethernet port and GUI
ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port allows the user to switch one Common ST Duplex port to any one of ten ST Duplex ports. The system affords local and remote access functionality. The Remote Ethernet Port allows for both Telnet and GUI remote control.
2-Channel RS530 / RJ45 Network Switch
The Model 7249-ESL is a 2-Channel Network Switch, with Channel One allowing the sharing of one DB25 interface device among two others with a Non-Secure and Secure switching option and Channel Two allowing the sharing of a single RJ45 device among two others with an A/B switching option. Both channels can be remotely controlled by Contact Closure or RS232 Serial Data and both hat the option of a secure Cutoff position.
Tri-channel RJ45/BNC A/B switch
M8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B.
Breakout Box
Model 800 is a (HSSI) High Speed Serial Interface (SCSI-2) Breakout Box that allows users to access and monitor any of the signals that pass through the unit uninterrupted via test point pins.
ST duplex fiber optic mirror A/B switch
ST duplex fiber optic mirror A/B switch supports fiber optic wavelength of 850 nm and gigabyte data rate. Model 6273 uses mirror technology and can be accessed remotely by using DB9 RS232 Serial port.
Model 9474 Cat5e RJ45 A/B/OFFLINE Keylock Switch
Model 9474 is an RJ45 A/B/OFFLINE Keylock Switch that allows the sharing of one RJ45 Device among two others or the isolation of all ports by switching to OFFLINE position. Three RJ45 Ports (A, B, and Common) are deep recessed inside unit for security.
QuickSwitch 6296 A/B/C/D Bypass Switch
QuickSwitch Model 6296 is a Single Mode, LC Duplex Fiber Optic Bypass Switch that supports connections between four sets of devices or peripherals, in two different switch positions, Normal and Bypass.
Cat5 10/100 Base-T Network Switch
The Model 9067 is ideal for government contractors and others who are looking for reliable, expandable, modular network switch systems. Up to 8 units can be housed in one Model 9025 rack.
Model 5534 Single Channel 4-State RJ45 Cat5e Network Switch
Model 5534 is a single channel 4-State OFF/SVCN/JSIS/GPCN RJ45 Cat5e Switch that is ideal for secure conference room communication applications and is manually operated by keylock.
LVDT smart indicator
The Model 4215-L Smart LVDT Indicator is an intelligent microprocessor-based instrument designed for the measurement and control of dual channel LVDT (linear variable differential transformer) measurement fixtures.
High Speed Ruggedized Fiber to Multi-Point RS485/422
The Model 4172 is a very high speed, ruggedized ST Duplex Fiber-to-Multi Point RS485/422 Interface Converter, ideal for applications requiring a single point-to-point or a multi-point communications link over short and long distances.
6-channel RJ45 Cat 5 A/B switch with individual channel control
The Path Way® Model 7356 6-Channel RJ45 Cat5 A/B Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's six channels.
Load cell smart indicator
The Model 4215A-204-1 Dual Channel Smart Indicator is an intelligent microprocessor based instrument designed for the measurement and control of strain gage transducer based systems.
QuickSwitch 7188 4-Channel Fiber Optic, LC Duplex Switch
QuickSwitch Model 7188 is a 4-Channel Fiber Optic LC Duplex, A/B Switch with an RJ45 10/100 Base-T Ethernet Remote Port for primary remote control and a DB9(F) that accepts RS232 Serial ASCII Commands for secondary remote control.
Model 7250 DB37 Network Switch
Model 7250 is a Single Channel DB37 A/B Switch that allows quick connection to any one of two devices from one Common device. The unit may be quickly and conveniently switched between states A and B by pressing its front-panel pushbutton.
CellMite ProD 4328 strain gage
The CellMite ProD Model 4328 is a high performance data acquisition and strain gage interface module from Electro Standards Laboratories that is suitable for embedded applications that require high speed and high accuracy analog and digital data acquisition.
M9456 6-Channel RJ45 A/B Switch, T1, 1U Height, Rackmount
The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.
5-to-1 BNC switch with remote control
PathWay Model 7334 5-to-1 BNC Switch with Remote Control allows the user the capability of accessing five separate devices, ports A through E, via connection through a device connected to the Common port of the switch.
Ads