---

Conductivity meter

This particular meter has few advantages

1. Size and compactability. Built in plumbing and sensor do not need replacement or service.

2. No need for external power since it uses 9v standard battery which will last aprox 1yr or more.

3. Meter does have calibration and setpoint adjustment trimpots which will enable the user to set to any desired value within the range.

4. 3 1/2 digit display shows the conductivity value in micro siemens(mhos)

5. Can be mounted directly in between the plumbing or enclosure mounting tabs will let you install the meter on the wall with screws.

5. John Guest quick connect fittings will make the installation a breeze.

Operation

Meter has two LED lights and a push button switch. When switch is pressed, it will light up either a Blue LED (good) or Yellow LED (service) depending on the setpoint setting. Factory setting for the setpoint is 50ppm which is maximum desirable value for RO systems . Our meters are factory calibrated with standard solutions and pass a 24hr plumbing check.

Specifications

Size : Enclosure 3"x3" , length of the plumbing 6"

Range: 0 to 500 mhos ( other ranges available)

Power: 9v battery included .Order the continous monitoring option that comes with ac adapter instead of batter.

Plumbing: Standard 1/2 " threaded coupling. Order with John Guest quick connects as an option (sizes 1/8", 1/4", 3/8", 1/2")

Pressure: Tested on 40 psi water pressure

Sensor : stainless steel

Email if you have other questions regarding the meter such as custom ranges ,color of enclosure ,private labeling etc.

Manufacturer/supplier's information

Company name:		waterguyart [ Homepage ]
Business address:		1404 south 4th street Montebello, CA90640
Telephone number:		3232361043
Contact name:		Art [ Email ]

---