 |
You're here: Sensors, transducers, detectors > Strain gauge > CellMite ProD 4328 strain gage
CellMite ProD 4328 strain gage
The CellMite® ProD Model 4328 is a high performance data acquisition and strain gage interface module from Electro Standards Laboratories that is suitable for embedded applications that require high speed and high accuracy analog and digital data acquisition. Powerful load cell electronics! The CellMite® ProD has four 16-bit high performance analog output channels with user specified scaling and offset, with a range of +/-10 volts. Direct PC or network communication is supported by USB, RS232, RS485 and Ethernet data channels. The communication channels are optically isolated in order to minimize system ground loops. For applications requiring on-board data storage, the CellMite® ProD features 1MWord of onboard memory along with an SD Card slot for additional bulk data storage. The CellMite® ProD also supports dual quadrature encorder or pulsed inputs often used for measuring rotational position or velocity. The CellMite® ProD features a wide input voltage range of 10VDC-36VDC, along with 3kVDC isolation. The CellMite® ProD is designed for ruggedized applications and operates from -40°C to +85°C. The CellMite® ProD features dual 24-bit independent strain gage channels with simultaneous sampling at 15K samples/second that can also be configured as quad 24-bit strain gage channels sampled at 5K samples/second. In addition, the CellMite® ProD features 12 additional 12-bit analog input channels with a throughput of 1M samples/second. Digital data acquisition is also supported with 64-bits of simultaneously sampled digital inputs. The digital inputs can be sampled at 20M samples/second.Specifications:
Analog Signal Inputs:
Very High Resolution, High Speed (Strain Gage) Channels:
Analog Input: Differential, strain gage compatible
Max. Sampling Rate: Dual channels operated, 15K
3mv/V nominal
Excitation: 5VDC
Resolution: 24-bit
Accuracy: 0.01%
Number of Channels: 4
samples/second, simultaneous.
Quad channels operated, 5K
samples/second.
Shunt Resistors: one per strain gage channel
60K precision.
Moderate Resolution, High Speed Channels:
Analog Input: Differential, general purpose.
Input Range: +/- 5 Volts
Resolution: 12-bit
Number of Channels: 12
Max. Sampling Rate: Single channel, 12M samples/second.
12 channels operated,
1M samples/second
Analog Signal Outputs:
Channels: 4, One analog output channel isolated output
Resolution: 16-bit
Range: +/- 10V
Scaling: User selectable gain and offset
Digital Signal Inputs:
Input type: Logic, TTL, and HC compatible with hysteresis
Number of Channels: 64 bits, simultaneously sampled
Max Sampling Rate: 20 M samples/second
Digital Counter Inputs:
Excitation: 5VDC
Interface: Single ended or Differential
Type: Dual quadrature or Pulse
Digital Contact Inputs:
Type: Optically isolated
Channels: 4
Digital Trigger:
Type: Digital Trigger
Digital Outputs:
Type: Optically isolated solid state relays
Switching: AC or DC signals
Range: 0 to +/- 400V Peak, 120 mA
Channels: 4
Digital Data Outputs:
Interface Type: USB, RS232, RS485, 10/100Base-T Ethernet
Isolation: Optical
Input Power:
Range: 10VDC-36VDC, std, 4.5VDC-9VDC
Power: 5W (Ex. 200 mA at 24 VDC)
Data Storage:
Onboard: 1M Word
Removable: SD Card
Electronic Identification:
Type: Solid State TagID
Channels: 4, one for each strain gage
Indicators:
Discrete: Dual LEDs
Alphanumeric: LCD display, optional
Mechanical:
Size: 7.5" x 5.5" x 1"
Mounting: 7 mounting holes
Signal Connectors: 2mm ribbon
Environment: Operating -40ºC to +85ºC
Manufacturer/supplier's information
| Company name: | Electro Standards Laboratories [ Homepage ] | |
| Business address: | 36 Western Industrial Drive Cranston, RI |
|
| Zip/postal code: | 02921 | |
| Telephone number: | 401-943-1164 | |
| Fax number: | 401-946-5790 | |
| Contact name: | Tina Corticelli [ Email ] |
Other products from this member
Cat5e RJ45 A/B Automatic Fallback Switch w/10 Base-T Remote and GUI
The PathWay Model 7339 Cat5e RJ45 A/B Automatic Fallback Switch with 10 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality. Remote Control access can be accomplished using an Ethernet 10/100-BASE-T connection and either Telnet commands or Graphical User Interface (GUI).
Load cell smart indicator
The Model 4215A-204-1 Dual Channel Smart Indicator is an intelligent microprocessor based instrument designed for the measurement and control of strain gage transducer based systems.
8-channel RJ45 A/B switch with redundant remote control & power supply
The Model 7237 8-Channel RJ45 A/B Switch with Redundant Remote Control and Power allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port.
High speed ruggedized fiber to USB interface converter
M4165 is a high speed ruggedized Fiber-to-USB interface converter. With its integrated rate buffering, the M4165 converts USB 2.0 compliant data from a standard PC to a serial asynchronous data interface over fiber with a user selectable baud rate of up to 3 Mbps.
USB Type-A, A/B Switch w/Remote Control
The PathWay® Model 4502 USB Type-A A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port of the switch.
Remotely controllable network switch
The Model 7345 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
Digital signal conditioner for strain gage sensors
The CellMite Model 4337 with auto identifying display is a digital signal conditioner that connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC.
Tri-channel RJ45 Cat 5 A/B network switch
M7348 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port for each of the switch's three channels.
ST duplex fiber optic switch with remote Ethernet port and GUI
ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port allows the user to switch one Common ST Duplex port to any one of ten ST Duplex ports. The system affords local and remote access functionality. The Remote Ethernet Port allows for both Telnet and GUI remote control.
DB-9 A/B/C/D switch with exclusive remote control
This compact, desktop, network switch enables connection of a workstation or device between 4 other devices or networks. The switch ports are transparent to data format.
Model 9474 Cat5e RJ45 A/B/OFFLINE Keylock Switch
Model 9474 is an RJ45 A/B/OFFLINE Keylock Switch that allows the sharing of one RJ45 Device among two others or the isolation of all ports by switching to OFFLINE position. Three RJ45 Ports (A, B, and Common) are deep recessed inside unit for security.
Keylock video conference room secure switching system
Model 5150 Video Conference Room Secure Network Switching System passes the connection of copper and fiber voice and data lines from the conference room equipment to the building data network.
M9456 6-Channel RJ45 A/B Switch, T1, 1U Height, Rackmount
The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.
Model 5534 Single Channel 4-State RJ45 Cat5e Network Switch
Model 5534 is a single channel 4-State OFF/SVCN/JSIS/GPCN RJ45 Cat5e Switch that is ideal for secure conference room communication applications and is manually operated by keylock.
5-to-1 BNC switch with remote control
PathWay Model 7334 5-to-1 BNC Switch with Remote Control allows the user the capability of accessing five separate devices, ports A through E, via connection through a device connected to the Common port of the switch.
QuickSwitch 7188 4-Channel Fiber Optic, LC Duplex Switch
QuickSwitch Model 7188 is a 4-Channel Fiber Optic LC Duplex, A/B Switch with an RJ45 10/100 Base-T Ethernet Remote Port for primary remote control and a DB9(F) that accepts RS232 Serial ASCII Commands for secondary remote control.
Tri-Channel RJ45 Cat5 A/B Switch w/Remote
The PathWay® Model 7359 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's three channels.
M8463 9-Channel DB15 Connect / Disconnect Switch
Model 8463 Network Switch is comprised of nine individually controlled, manually operated DB15 Connect / Disconnect Switches that utilizes MIL components and is designed to support rugged MIL applications.
Tri-channel RJ45/BNC A/B switch
M8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B.
Cat 5 RJ45 100-base-T A/B switch
The PathWay® Model 7344 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
Ads