 |
 |
You're here: Computer networking > Network switch > Cat5e RJ45 A/B Automatic Fallback Switch w/10 Base-T Remote and GUI
Cat5e RJ45 A/B Automatic Fallback Switch w/10 Base-T Remote and GUI
The PathWay Model 7339 Cat5e RJ45 A/B Automatic Fallback Switch with 10 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality. Remote Control access can be accomplished using an Ethernet 10/100-BASE-T connection and either Telnet commands or Graphical User Interface (GUI).When in automatic fallback mode the unit monitors data activity on port A. If activity is lost, the unit checks for data on Port B and in the presence of data, siwtches to position B. The Model 7339 A/B switch will maintain its connection to port B until data activity is detected on port A, at which time the unit will automatically return to the A position. If no data is present on either port A or on port B, the unit will stay in the A position and continue to monitor for data. The user can override automatic fallback operation from the front panel or GUI interface and force the unit to operate as an A/B switch.
Features:
- The switch ports are transparent to all data.
- All switched signals are passed via latching copper contact relays that maintain their position and continuity even in the event of a power loss or failure.
- All pins of the RJ45 interface are switched.
- Remote Control Telnet command interface or Graphical User Interface that allow the user to control switch position, lockout front panel operations and obtain switch status.
- Interface meets Cat5e performance.
- Control of the switch position from a 10/100-Base-T LAN Ethernet environment.
- Front panel LEDs display switch position, the switch mode (automatic fallback or manual) as well as power status.
- Cables for the switch are available from stock!
Specifications:
Port Connectors: (3) RJ45(F) connectors labeled A, B and COMMON.
Remote Control: (1) RJ45(F) Connector on rear panel accepts 10/100-Base-T LAN Access Ethernet and Graphical User Interface (GUI) for Remote Control operation.
Front Panel Controls: (1) Manual pushbutton allows local switching.
Display: (2) Front panel LED's display switch position and power status.
Power: UL Approved 110/120VAC, 60Hz wall mount power module supplies 12 VAC, 500 mA to the unit.
Dimensions: 19" W x 1.75" H x 8" D.
Weight: 4.5 lbs.
Manufacturer/supplier's information
| Company name: | Electro Standards Laboratories [ Homepage ] | |
| Business address: | 36 Western Industrial Drive Cranston, RI, USA |
|
| Zip/postal code: | 02921 | |
| Telephone number: | 401-943-1164 | |
| Fax number: | 401-946-5790 | |
| Contact name: | Tina Corticelli [ Email ] |
Product groups: Switch network switch
Other products from this member
QuickSwitch 6296 A/B/C/D Bypass Switch
QuickSwitch Model 6296 is a Single Mode, LC Duplex Fiber Optic Bypass Switch that supports connections between four sets of devices or peripherals, in two different switch positions, Normal and Bypass.
Dual channel RS530 Mode-S network switch, DB25 w/remote
The PathWay® Model 7254 Dual Channel RS-530 Mode-S, AB Switch with DB25 Interface, Remote Control and Auto-Switching Functions allows the user two independent channels of A/B switch function.
8-channel RJ45 A/B switch with redundant remote control & power supply
The Model 7237 8-Channel RJ45 A/B Switch with Redundant Remote Control and Power allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port.
6-channel RJ45 Cat 5 A/B switch with individual channel control
The Path Way® Model 7356 6-Channel RJ45 Cat5 A/B Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's six channels.
Cat 5 RJ45 100-base-T A/B switch
The PathWay® Model 7344 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
DB-9 A/B Switch with RS232 Remote Control
Model 7200 DB9 A/B Switch with Remote Control via RS232 Serial port allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port of the switch.
Digital signal conditioner for strain gage sensors
The CellMite Model 4337 with auto identifying display is a digital signal conditioner that connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC.
LVDT smart indicator
The Model 4215-L Smart LVDT Indicator is an intelligent microprocessor-based instrument designed for the measurement and control of dual channel LVDT (linear variable differential transformer) measurement fixtures.
Tri-Channel RJ45 Cat5 A/B Switch w/Remote
The PathWay® Model 7359 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's three channels.
ST duplex fiber optic mirror A/B switch
The QuickSwitch 6272 ST duplex fiber optic A/B switch with remote serial control provides a powerful and versatile tool to manage switch requirements. M6272 can be switched locally via a pushbutton or remotely via remote serial port.
8-strand LC single mode fiber mirror A/B switch
The QuickSwitch® 6261 8-strand fiber optic LC switch with 10 Base-T LAN telnet access, allows the user the capability of sharing 8 fiber optic LC strands connected to the "COMMON" port among two other sets of 8 strands connected to the "A" and "B" ports with local and remote access functionality.
6-Channel All Optic Online/Offline Switch w/Remote
Model 6258 6-Channel LC Duplex, All Optic Online/Offline Switch with 10 Base-T LAN TELNET access allows the user to connect each input fiber optic cable to its respective output fiber optic cable or, alternatively, to disconnect the input fiber optic cable from its respective output fiber optic cable. All channels are switched, individually.
2-Channel RS530 / RJ45 Network Switch
The Model 7249-ESL is a 2-Channel Network Switch, with Channel One allowing the sharing of one DB25 interface device among two others with a Non-Secure and Secure switching option and Channel Two allowing the sharing of a single RJ45 device among two others with an A/B switching option. Both channels can be remotely controlled by Contact Closure or RS232 Serial Data and both hat the option of a secure Cutoff position.
5-to-1 BNC switch with remote control
PathWay Model 7334 5-to-1 BNC Switch with Remote Control allows the user the capability of accessing five separate devices, ports A through E, via connection through a device connected to the Common port of the switch.
Model 7250 DB37 Network Switch
Model 7250 is a Single Channel DB37 A/B Switch that allows quick connection to any one of two devices from one Common device. The unit may be quickly and conveniently switched between states A and B by pressing its front-panel pushbutton.
High Speed Ruggedized Ethernet-to-RS485/422/232 Interface Converter
M4164 Board unit converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from a standard LAN/WAN connection to a serial asynchronous data interface over RS232, or RS485/422 networks with a user selectable baud rate of up to 921,600 bps.
DB-9 A/B/C/D switch with exclusive remote control
This compact, desktop, network switch enables connection of a workstation or device between 4 other devices or networks. The switch ports are transparent to data format.
Tri-channel RJ45 Cat 5 A/B network switch
M7348 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port for each of the switch's three channels.
M9456 6-Channel RJ45 A/B Switch, T1, 1U Height, Rackmount
The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.
Quad channel fiber optic A/B switch
QuickSwitch Model 6257 4-Channel Fiber Optic A/B Switch allows devices connected to COMMON port of each channel access to the A or B port of each channel. All channels are switched simultaneously.
Other products at Computer networking > Network switch
M8463 9-Channel DB15 Connect / Disconnect Switch
Model 8463 Network Switch is comprised of nine individually controlled, manually operated DB15 Connect / Disconnect Switches that utilizes MIL components and is designed to support rugged MIL applications.
Cat5 10/100 Base-T Network Switch
The Model 9067 is ideal for government contractors and others who are looking for reliable, expandable, modular network switch systems. Up to 8 units can be housed in one Model 9025 rack.
Tri-channel RJ45/BNC A/B switch
M8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B.
High Speed Ruggedized Fiber to Multi-Point RS485/422
The Model 4172 is a very high speed, ruggedized ST Duplex Fiber-to-Multi Point RS485/422 Interface Converter, ideal for applications requiring a single point-to-point or a multi-point communications link over short and long distances.
Model 5534 Single Channel 4-State RJ45 Cat5e Network Switch
Model 5534 is a single channel 4-State OFF/SVCN/JSIS/GPCN RJ45 Cat5e Switch that is ideal for secure conference room communication applications and is manually operated by keylock.
Ads