 |
You're here: Cables, wires, connectors > SCSI connector > Breakout Box
Breakout Box
Model 800 HSSI (SCSI-2) Interface Breakout Box allows the user to access and monitor any of the signals that pass through the unit uninterrupted via test point pins. 50 pins on front panel allow access to all interface signals. Connect in series with interconnected SCSI interface devices. Included with the breakout box are 15 one-foot mini patchords that plug into the test points. Input output connectors are female 50-Pin SCSI-2 (Mini-50). Compact size: 4.0" x 5.25" x 1.75". Rugged aluminum case with metal hinge. HSSI: High Speed Serial Interface. HSSI is a short distance communications interface that is commonly used to interconnect routing and switching devices on local area networks with the higher speed lines of wide area networks.SCSI: Small Computer System Interface
SCSI is a hardware interface that allows for the connection of up to 15 peripheral devices to a single PCI board called a "SCSI host adapter". SCSI uses a bus structure and functions like a mini-LAN connecting 16 devices, with the host adapter counting as one device. SCSI allows any two devices to communicate at one time (host to peripheral, peripheral to peripheral).
SCSI-2
Both ends of the cable use a 50-Pin male plug which can plug directly into the Model 800 (SCSI-2) HSSI Breakout Box
Manufacturer/supplier's information
| Company name: | Electro Standards Laboratories [ Homepage ] | |
| Business address: | 36 Western Industrial Drive Cranston, RI, USA |
|
| Zip/postal code: | 02921 | |
| Telephone number: | 401-943-1164 | |
| Fax number: | 401-946-5790 | |
| Contact name: | Tina Corticelli [ Email ] |
Other products from this member
Tri-Channel RJ45 Cat5 A/B Switch w/Remote
The PathWay® Model 7359 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's three channels.
Tri-channel RJ45/BNC A/B switch
M8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B.
Model 9474 Cat5e RJ45 A/B/OFFLINE Keylock Switch
Model 9474 is an RJ45 A/B/OFFLINE Keylock Switch that allows the sharing of one RJ45 Device among two others or the isolation of all ports by switching to OFFLINE position. Three RJ45 Ports (A, B, and Common) are deep recessed inside unit for security.
ST duplex fiber optic mirror A/B switch
ST duplex fiber optic mirror A/B switch supports fiber optic wavelength of 850 nm and gigabyte data rate. Model 6273 uses mirror technology and can be accessed remotely by using DB9 RS232 Serial port.
DB-9 A/B Switch with RS232 Remote Control
Model 7200 DB9 A/B Switch with Remote Control via RS232 Serial port allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port of the switch.
8-channel RJ45 A/B switch with redundant remote control & power supply
The Model 7237 8-Channel RJ45 A/B Switch with Redundant Remote Control and Power allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port.
Cat5e RJ45 A/B Automatic Fallback Switch w/10 Base-T Remote and GUI
The PathWay Model 7339 Cat5e RJ45 A/B Automatic Fallback Switch with 10 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality. Remote Control access can be accomplished using an Ethernet 10/100-BASE-T connection and either Telnet commands or Graphical User Interface (GUI).
Load cell smart indicator
The Model 4215A-204-1 Dual Channel Smart Indicator is an intelligent microprocessor based instrument designed for the measurement and control of strain gage transducer based systems.
High speed ruggedized fiber to USB interface converter
M4165 is a high speed ruggedized Fiber-to-USB interface converter. With its integrated rate buffering, the M4165 converts USB 2.0 compliant data from a standard PC to a serial asynchronous data interface over fiber with a user selectable baud rate of up to 3 Mbps.
Quad channel fiber optic A/B switch
QuickSwitch Model 6257 4-Channel Fiber Optic A/B Switch allows devices connected to COMMON port of each channel access to the A or B port of each channel. All channels are switched simultaneously.
6-channel RJ45 Cat 5 A/B switch with individual channel control
The Path Way® Model 7356 6-Channel RJ45 Cat5 A/B Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's six channels.
M9456 6-Channel RJ45 A/B Switch, T1, 1U Height, Rackmount
The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.
M8463 9-Channel DB15 Connect / Disconnect Switch
Model 8463 Network Switch is comprised of nine individually controlled, manually operated DB15 Connect / Disconnect Switches that utilizes MIL components and is designed to support rugged MIL applications.
Model 5534 Single Channel 4-State RJ45 Cat5e Network Switch
Model 5534 is a single channel 4-State OFF/SVCN/JSIS/GPCN RJ45 Cat5e Switch that is ideal for secure conference room communication applications and is manually operated by keylock.
High Speed Ruggedized Fiber to Multi-Point RS485/422
The Model 4172 is a very high speed, ruggedized ST Duplex Fiber-to-Multi Point RS485/422 Interface Converter, ideal for applications requiring a single point-to-point or a multi-point communications link over short and long distances.
ST duplex fiber optic switch with remote Ethernet port and GUI
ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port allows the user to switch one Common ST Duplex port to any one of ten ST Duplex ports. The system affords local and remote access functionality. The Remote Ethernet Port allows for both Telnet and GUI remote control.
ST duplex fiber optic mirror A/B switch
The QuickSwitch 6272 ST duplex fiber optic A/B switch with remote serial control provides a powerful and versatile tool to manage switch requirements. M6272 can be switched locally via a pushbutton or remotely via remote serial port.
Keylock video conference room secure switching system
Model 5150 Video Conference Room Secure Network Switching System passes the connection of copper and fiber voice and data lines from the conference room equipment to the building data network.
Digital signal conditioner for strain gage sensors
The CellMite Model 4337 with auto identifying display is a digital signal conditioner that connects directly to a standard strain gage transducer and simultaneously generates a serial output for direct connection to a PC.
Remotely controllable network switch
The Model 7284 multi-perpherial A/B sharing switch with remote contact Control provides a powerful tool to manage switching requirements. The Model 7284 network switch switches mouse, keyboard and USB ports simultaneously.
Ads