7 Surface Mount Proximity Sensor Series
Seven series of compact surface mount reed sensors that require no external power for detecting movement and fluid levels in consumer products such as coffee makers, and automotive, medical, security, and telephone hook switch applications are sealed in a rugged thermoset molded package.
MEDER SMD Reed Sensors are magnetically operated proximity sensors that are used to detect movement in a wide variety of applications. Featuring low loss ferromagnetic reed blades and hermetically sealed contacts, these SMD's are as small and robust designs that come in several configurations, including flat straight, gull lead or J-lead designs.
Supplied taped and reeled according to IEC 286 / part 3, suitable for pick and place equipment. MEDER Reed Sensors are available with the following data, depending upon the switch selected: 1-10 W/VA switching power, 30-2500 VDC switching voltage, and 0.3 - 5.0 carry current, -40'C to +130'C operating temperatures, operating time for form A is 0.25-0.8 ms and form C is 0.8-5.0 ms, 100 g's shock at 11 ms, and 30 g's vibration at 50-2000 Hz-
MK01-H: L18.8mm x W3.7mm x H3.4mm | J-Lead Design | Single Pole Double-throw (Form C)Changeover
MK15-B-2-OE: L19.5mm x W2.5mm x H3.75mm | Gull Lead Design | Normally Closed (Form B)
MK15-x-1: L19.5mm x W2.5mm x H2.5mm | Axial Lead / Flush Mount Design | Normally Open (Form A)
MK15-x-2: L19.5mm x W2.5mm x H2.6mm | Gull Lead Design | Normally Open (Form A)
MK16-x-1: L15.6mm x W2.3mm x H2.3mm | Axial Lead / Flush Mount Design | Normally Open (Form A)
MK16-x-2: L15.6mm x W2.3mm x H2.4mm | Gull Lead Design | Normally Open (Form A)
MK17-x-1: L12.50mm x W2.1mm x H2.1mm | Axial Lead / Flush Mount Design | Normally Open (Form A)
MK17-x-2: L12.15mm x W2.1mm x H2.1mm | Gull Lead Design | Normally Open (Form A)
MK17-x-3: L9.7mm x W2.1mm x H2.1mm | J-Lead Design | Normally Open (Form A)
MK22-x-1: L15.6mm x W2.95mm x H2.3mm | Axial Lead / Flush Mount Design | Normally Open (Form A)
MK22-x-2: L15.6mm x W2.95mm x H2.3mm | Gull Lead Design | Normally Open (Form A)
MK22-x-4: L19.5mm x W2.95mm x H2.3mm | Long Gull Lead Design | Normally Open (Form A)
MK24-x-1: L7.7mm x W2.0mm x H1.5mm | Axial Lead Design | Normally Open (Form A)
MK24-x-3: L5.1mm x W2.0mm x H1.5mm | J-Lead Design | Normally Open (Form A)
MMS-x-1: L4.8mm x W2.5mm x H1.2mm | Axial Lead / Flush Mount Design | Normally Open (Form A)
MMS-x-2: L4.8mm x W2.5mm x H1.25mm | Gull Lead Design | Normally Open (Form A)
||10 Little Brook Rd, West Wareham, MA
||Julie Dargie [ Email ]
Other products from this member
Magnetic Reed Switches can be customized for your design needs. Some customization includes sorting specific magnetic sensitivity pull-in ranges and cutting and/or bending the Reed contact leads for either horizontal or vertical surface mount applications or other special mounting requirements. Proper handling and manufacturing technique as well as specialized equipment are essential to producing high quality Reed Products.
Miniature High Voltage Reed Relays In the modern world, there is a constant drive to reduce size yet increase the performance of almost every type of electronic component. With that in mind, MEDER electronic has introduced two new high voltage Reed Relays for PCB mounting. These miniature high voltage relays take up only 40x15x13.5mm board area. These high voltage relays offer a switching voltage of 1 kVDC with a 4 kVDC or 6-kVDC option across the contacts.
1 GHz REED RELAYS RATED FOR ONE BILLION OPERATIONS A full line of electrostatic- and coaxial shielded reed relays that come in several versions for use in OEM and aftermarket ATE test equipment is being introduced by MEDER electronic. MEDER LP-Series Reed Relays are designed for 1 GHz applications and feature compact metal cases with hermetically sealed contacts. Rated for one billion operations, these magnetically-shielded devices provide 1012 ohm insulation resistance. 5, 12, & 24VDC
Three new versions of Level Sensor Series LS03 have been introduced into the market to meet the wider demands of our customer's more specialized application needs. Thus far, the LS03 Level Sensors were only capable of mounting to the inside of the liquid container or reservoir. These level sensors can be externally mounted to devices such as in modern air conditioners, cooling devices, high-pressure cleaners and many other technologically advanced household appliances.
MEDER electronic's MK24 series Reed Sensors achieve a minimum life expectancy of 50 million operations at 5V, 5mA, 100Hz while measuring only 5mm x 1.8mm x 2.2mm. At 50 millions operations, the MK24's base reed switch, a 4mm KSK-1A04 unequivocally surpassed all other reed switches in its size class. The MK24 reed sensor is a hermetically sealed switch in a robust thermoset molded package. This tiny energy saving device requires no external power to operate.
The LS04 Liquid Level Sensors are a versatile multi-point level sensor made of plastic which can be customized to hold up to 6 magnetic floats and mount to either the top or bottom of a tank using various mounting options. The LS04 housing tube comes in two different plastic options, Polyamide (PA) and Polypropylene (PP) and standard lengths ranging from 80mm [3.14"] to 250mm [9.84"].
Miniature SIL HV Series High Voltage/High Current Reed Relays in an epoxy sealed, single-in-line package measuring only 24mm x 6.4mm x 8.9mm. An optional offset pin-out measuring 29mm x 6.4mm x 8.9mm is also available. Standard coil selections include 5 or 12 volts with or without diode suppression. This series can switch up to 1000 volts and carry up to 5 amps for up to 50 milli-seconds at a consistent repetition rate or 10A pulse
The CR series is our smallest and most versatile instrument grade reed relay series. The CRF Series has a flat insertion loss curve from DC up to 7 GHz, attained by keeping the signal path as short as possible and using an internal coaxial shield with a consistent 50 Ohm impedance path. Not only is it excellent with RF signals, but is also great for digital signals where the skew rates or effects on the rise time of fast digital pulses is less than 40 picoseconds through the relay.
MEDER electronic features a full line of reed relays offering high voltage and high power configurations for PCB mount or free-standing applications. MEDER High Voltage Reed Relays are designed to switch high voltages, stand off even higher voltages, and carry very high current levels.
The CL ,DIL-CL and NP-CL series are used for line sensing in telecommunication devices. These reed relays are superior to electronic solutions regarding flashover and impulse strength. Versions with low coil resistance values down to 4 Ohm and pull-in current
The MK11 Series offers sensor mounting convenience with its built-in threaded portal. Used in limit switching, end position, and proximity switching applications, these MK11 Reed Sensors are offered in plastic, stainless steel, and now a new brass version. This new brass version of our MK11 is more robust and resilient to harsh conditions. They are an affordable and excellent choice for all applications requiring flexible sensing adjustment and multiple switching options.
A full line of molded reed relays offered in dual-in-line package for a wide variety of test and measurement, telecommunications, and security equipment applications are available from MEDER electronic. MEDER DIP Series Molded Reed Relays feature high voltage versions in 1-Form-A, 2-Form-A, 1-Form-B, and 1-Form-C packages. Providing high resistance coils up to 2000 W 12 VDC, with up to 4.25 kVDC breakdown voltage, DIP are offered with an internal diode and magnetic shields.
MICRO MACHINED SENSOR NEEDS NO POWER A new, ultra-small magnetically actuated reed sensor that requires no power and is designed for switching CMOS gates and other low power devices such as implantable medical pacemakers and insulin pumps is being introduced by MEDER electronic. MEDER MMS Reed Sensors are magnetically actuated on/off sensors that feature no power draw and measure only 2.8mm x 2.Omm sq. (0.110" x 0.08").
The 2-Pole Micro SIL expands the MS Series Reed Relays MICRO SIL Reed Relays are a single-in-line Reed Relay using only 15.11 x 3.81 mm of board space which is half the standard SIL requirement. They are used as voltage relays and are designed for pick-and-place assembly equipment, allowing close placement on PC boards. MEDER MS Series Micro SIL Reed Relays are rugged and highly uniform for use with high speed pick-and-place assembly equipment and feature an internal magnetic shield which allo
Quests for smaller and smaller designs in connection with fast microprocessors set continuing challenges to relay manufacturers. To fulfill these quests, MEDER has expanded the MS Series for applications with higher frequency. The new MSRF05-1A87-75L is a Reed Relay designed in a miniature single-in-line package measuring 15.2mm x 3.8mm x 6.8mm (L x W x H). This new package size takes up half the space of a conventional reed relay.
MEDER electronic offers the largest selection of Reed Switches ranging in size from 4mm-52mm in a whole host of contact and power configurations. MEDER is the world's largest OKI Reed Switch source proving solutions for all your standard and custom switching needs. MEDER electronic has a switch for just about every type of switching needs including custom switch lead lengths and forming for PCB or other special mounting requirements.
A new series of patented ferromagnetic proximity switches that operate in the presence of a ferrous metal, rather than requiring actuating magnets, is being introduced by MEDER electronic. MEDER MK02 Series Ferromagnetic Metal Detection sensors are single component devices, which sense magnetically conductive materials directly without the need for two separate magnet and sensing elements.
MEDER electronic's MK23 Series Reed Sensors have expanded with the addition of our new MK23-90 Reed Sensor. The MK23- 90-C-2 is a Single-Pole Double-Throw switch with a 14mm glass body. This SPDT (Form C) surface mount sensor comes in two lead designs, lead design 1 (straight cut axial lead) and lead design 2 ("Gull Wing" with coined bent leads). The MK23-90 sensor comes in 5 contact sensitivity ranges.
KSK-1A04 Series Reed Switches are magnetically actuated, ultraminiature, low power reed switches. Designed with flat lead terminals they provide consistent contact orientation and larger contact soldering surface in SMT applications. KSK-1A04 Series Reed Switches, at 4mm in glass size are currently the smallest reed switch offered by MEDER electronic and the world's smallest reed switch with flat contact terminals.
The LS05 Liquid Level Sensors reach new levels. Made of a tough stainless steel housing, these sensors can be customized up to 6.5 feet in length, detect countless liquid levels and withstand high water pressure and high temperatures up to 200°C. The LS05 Series Liquid Level Sensors is the most diverse level sensor yet, combining hundreds of standard options ranging from switching power and connectivity to fluid types and number of liquid levels.
Other products at Sensors, transducers, detectors > Proximity sensor
REED SENSORS REPLACE MECHANICAL SWITCHES The Rectangular Flange Mount Reed Sensors offer billions of reliable switching operations in wet and dirty applications. These magnetically operated reed proximity switches are waterproof and can be mounted almost anywhere, making them suitable replacements for mechanical switches. MEDER's Reed Sensor series MK02, MK04, MK05, MK09, MK12, MK13 and MK21 are magnetically operated reed proximity switches constructed in hermetically sealed packages.