6-Channel All Optic Online/Offline Switch w/Remote
The QuickSwitch® 6258 Fiber Optic Online/Offline 6-Channel Switch allows the user to CONNECT each input fiber optic cable to its respective output fiber optic cable or, alternatively, to DISCONNECT the input fiber optic cable from its respective output fiber optic cable. All channels are switched, individually. Switching may be accomplished locally by front panel control, or remotely using an Ethernet 10-Base-T connection and Telnet commands. The front panel LED's display switch position, status, and power.
- Fiber Optic Switch employs mirror technology.
- Control of the switch locally or via REMOTE input that accepts 10-Base-T LAN Ethernet connection.
- Wavelength is 1300 nm.
- The switch ports are transparent to all data.
- Switch maintains position on power loss and continues to pass data.
- Front panel LED's display switch position and power status.
- Remote Telnet control allows switch status monitoring and front panel lockout.
- All fiber ports are LC Duplex, multimode, 62.5/125 mm.
- Keyslots allow for wall mount or desktop.
Port Connectors: (12) LC duplex fiber optic connectors labeled ON and OFF. (2 for each of the 6 channels).
Wavelength: 1300 nanometers
Power: UL Approved wall mount power module, 120 VAC, 60 Hz supplies 12 VAC, 500 mA.
Remote Port: (1) RJ45 female connector accepts 10-Base-T LAN connection for remote control switching.
Display: (12) Red, front panel LEDs indicate switch position, status and power.
Control: (6) Pushbutton controls allow local switching.
Dimensions: Rackmount Configuration, 16.75"W x 3.5"H x 8" D
Weight: Approx. 4.5 lbs
QuickSwitch® is a registered trademark of Electro Standards Laboratories. Check out our complete line of QuickSwitch® Fiber Optic Network Switches.
||Electro Standards Laboratories [ Homepage ]
||36 Western Industrial Drive
||Tina Corticelli [ Email ]
Other products from this member
The Model 4215-L Smart LVDT Indicator is an intelligent microprocessor-based instrument designed for the measurement and control of dual channel LVDT (linear variable differential transformer) measurement fixtures.
The Model 7249-ESL is a 2-Channel Network Switch, with Channel One allowing the sharing of one DB25 interface device among two others with a Non-Secure and Secure switching option and Channel Two allowing the sharing of a single RJ45 device among two others with an A/B switching option. Both channels can be remotely controlled by Contact Closure or RS232 Serial Data and both hat the option of a secure Cutoff position.
M7348 Tri-Channel RJ45 Cat5 A/B Switch with Remote Control allows the capability of accessing two separate devices, ports A&B via connection through a device connected to the Common port for each of the switch's three channels.
Model 800 is a (HSSI) High Speed Serial Interface (SCSI-2) Breakout Box that allows users to access and monitor any of the signals that pass through the unit uninterrupted via test point pins.
The Model 7237 8-Channel RJ45 A/B Switch with Redundant Remote Control and Power allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port.
The QuickSwitch 6275 ST Duplex 8-position fiber optic switch with Remote serial control allows the user to switch one Common ST Duplex port to any one of eight ST Duplex ports, or to be switched to an Off-Line position isolating all ports from each other.
The PathWay® Model 7286 DB25 Crossover Switch Box with Contact Control Remote Port supports connections between four devices or peripherals connected to ports A, B, C, and D, in two different switch positions: Normal and Crossover.
The QuickSwitch® 6261 8-strand fiber optic LC switch with 10 Base-T LAN telnet access, allows the user the capability of sharing 8 fiber optic LC strands connected to the "COMMON" port among two other sets of 8 strands connected to the "A" and "B" ports with local and remote access functionality.
The PathWay® Model 7344 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common.
Model 8463 Network Switch is comprised of nine individually controlled, manually operated DB15 Connect / Disconnect Switches that utilizes MIL components and is designed to support rugged MIL applications.
The PathWay Model 7339 Cat5e RJ45 A/B Automatic Fallback Switch with 10 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality. Remote Control access can be accomplished using an Ethernet 10/100-BASE-T connection and either Telnet commands or Graphical User Interface (GUI).
ST duplex fiber optic mirror A/B switch supports fiber optic wavelength of 850 nm and gigabyte data rate. Model 6273 uses mirror technology and can be accessed remotely by using DB9 RS232 Serial port.
Model 5150 Video Conference Room Secure Network Switching System passes the connection of copper and fiber voice and data lines from the conference room equipment to the building data network.
QuickSwitch Model 7188 is a 4-Channel Fiber Optic LC Duplex, A/B Switch with an RJ45 10/100 Base-T Ethernet Remote Port for primary remote control and a DB9(F) that accepts RS232 Serial ASCII Commands for secondary remote control.
Model 7277 DB9 A/B Switch with Contact Control Remote allows the user the capability of accessing two separate devices, ports A and B, via connection through a device connected to the Common port.
The Model 9067 is ideal for government contractors and others who are looking for reliable, expandable, modular network switch systems. Up to 8 units can be housed in one Model 9025 rack.
The Model 9456 Six-Channel RJ45 A/B Switch allows devices connected to the Common port of each channel to access the A or B port of each channel. All channels are switched simultaneously. This unit switches six Primary Rate Interface (PRI) input channels to output devices A or B.
The Path Way® Model 7356 6-Channel RJ45 Cat5 A/B Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's six channels.
Model 7200 DB9 A/B Switch with Remote Control via RS232 Serial port allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port of the switch.
Model 5534 is a single channel 4-State OFF/SVCN/JSIS/GPCN RJ45 Cat5e Switch that is ideal for secure conference room communication applications and is manually operated by keylock.
Other products at Telecommunication equipment > Fiber optic communication > Fiber optic switch
The QuickSwitch 6272 ST duplex fiber optic A/B switch with remote serial control provides a powerful and versatile tool to manage switch requirements. M6272 can be switched locally via a pushbutton or remotely via remote serial port.
ST Duplex 10-position Fiber Optic Switch with Remote Ethernet Port allows the user to switch one Common ST Duplex port to any one of ten ST Duplex ports. The system affords local and remote access functionality. The Remote Ethernet Port allows for both Telnet and GUI remote control.
QuickSwitch Model 6296 is a Single Mode, LC Duplex Fiber Optic Bypass Switch that supports connections between four sets of devices or peripherals, in two different switch positions, Normal and Bypass.
QuickSwitch Model 6257 4-Channel Fiber Optic A/B Switch allows devices connected to COMMON port of each channel access to the A or B port of each channel. All channels are switched simultaneously.