computer hardware, electronic components, consumer electronics  
High power electronic components such as insulated gate bipolar transistors, diodes, microprocessors and memory chips generate heat during operation. The speed and power capabilities of electronic circuit modules are severely limited without an efficient mechanism to transfer heat. Heat generated by electronic devices and other equipment may be dissipated to allow for efficient operation and to prevent damage to components. In some applications, a heat exchanger or heat sink may be used to effectuate the dissipation of heat. Heat exchangers are metal heat radiators designed to remove heat from electronic components, particularly power transistor modules, by thermal conduction, convection, or radiation. Heat exchangers dissipate heat at a surface of an electronic module which may be generated by an internal junction of a semiconductor device within the module. Heat exchangers may also transfer heat from the location of device being cooled to another location by providing passages for a fluid coolant to flow through the heat exchanger.

Listings on Electronic components : Electronic cooling : Heat exchangers

  • AccuTherm, Inc.
    Design and manufacture of heating systems for the extrusion press industry, tubular finned heaters, immersion heaters, air duct heaters, radiant heaters, thermocouples, control systems, coiled heat exchangers, plate heaters, urn heaters, and accessories. USA.
  • Air-X-Changers
    Supplier of air-cooled heat exchangers used to protect compression systems and condition natural gas during recovery, compression and transportation from underground reserves through the major pipeline distribution channels, also widely used in turbine lube oil cooling, landfill gas compression and liquids cooling. USA.
  • API Heat Transfer Inc.
    Producer of industrial heat exchangers and heat transfer systems including shell and tube heat exchangers, ES extended surface plate fin heat exchanger, Schmidt-Bretten gasketed plate heat exchangers, semi-welded plate and frame heat exchangers, aluminum air-cooled heat exchangers, short-time heating systems, evaporation systems, deaeration systems, dealcoholization systems, and moisture separator. USA.
  • BERG Chilling Systems Inc.
    Manufacturer of remote air-cooled split modules, indoor air-cooled modules, outdoor air-cooled models, ice rink chiller systems, chiller pump tanks, fiberglass cooling towers, water temperature controls, blown film coolers, heat exchangers, fluid filtration systems, and chemical treatment systems. Canada.
  • Bos-Hatten, Inc.
    Manufacture and design of custom shell and tube heat exchangers with thermal and mechanical warranties, integration of burgess-manning separation and silencing technology into heat exchangers, providing replacement units and spare parts for Bos-Hatten , IPE & Adsco heat exchangers. USA.
  • Camac Industries
    Manufactures a complete line of plastic, stainless steel and rubber lined horizontal and vertical pumps. A variety of cartridge, tube and sleeve, and disk type filter units come equipped with or without slurry systems. Camac also manufactures graphite jacketed and plate and frame heat exchangers. Additional products include tank and pump stations and refrigeration units. USA.
  • Catalytic Products International, Inc.
    Manufactures a complete line of thermal treatment alternatives to complement every kind of air pollution problem. Products include catalytic oxidizers, thermal oxidizers, regenerative thermal oxidizers, concentrators, shell and tube heat exchanger, plate and frame heat exchanger, air cooled heat exchanger, air pollution control equipment, air pollution control systems incinerators. USA.
  • Cooling Technology Inc.
    Designs, manufactures and services a wide range of products including air- and water-cooled chillers, central evaporative-cooled chillers, dry fluid coolers, evaporative fluid coolers, cooling towers, in-line and side-stream water filters, turn-key open- or closed-loop process cooling systems, temperature control units, and specialty industry products, such as our food processing and medical chillers. USA.
  • Ellett Industries Ltd.
    Specializes in high performance alloy fabrication using titanium, zirconium, tantalum, high nickel alloys and stainless steels. Designs, develops, manufactures and repairs pressure vessels, heat exchangers and related Piping Systems for a variety of process industries. Canada.
  • Ellis Corporation
    Provides expertise in heat and heat transfer applications. Manuafactures hot water storage system, boiler feed water systems, water heaters, stack gas heat absorber, heat exchangers, waste water heat recovery system, fuel oil heaters, magnetic coupling coolers, and steam to water U-tube heat exchangers. USA.
  • Exergy, LLC
    Engaged in design, engineering and fabricating shell and tube heat exchangers, manufactures a broad line of stainless steel (316L) miniature heat exchangers. Custom fittings, materials, and configurations are available. USA.
  • Feldmeier Equipment, Inc.
    Provides heat exchangers for pasteurization, heating and cooling, complete skidded systems with programming & start-up services, hot water circulating units, thermal storage units, rapid mixers, pharmaceutical & biotech tanks, stainless steel processors, single shell tanks, field erected tanks, and deareators. USA.
  • FlatPlate, Inc.
    Manufactures a full line of refrigeration, hydronic heating and industrial process heat exchangers, including evaporators, fluid chillers, condensers, subcoolers, economizers, compressor oil coolers, air driers and other models for refrigeration, air conditioning and heat pump applications. USA.
  • General Air Products, Inc.
    Manufacturing, engineering and distributing industrial, compressed air and process cooling equipment, including air cooled chillers, water cooled chillers, fluid pumping stations, heat exchangers, air compressors for fire protection, desiccant air dryers, refrigerated air dryers, filters, drains, safety valves, oil water separators and a host of ancillary equipment. USA.
  • Lytron
    Manufactures cooling systems and heat exchangers used in electronic applications including semiconductor equipment, analytical instruments, and industrial lasers. Liquid cooling products include recirculating chillers, modular cooling systems, copper and stainless steel tube-fin heat exchangers, aluminum oil coolers, brazed liquid-to-liquid heat exchangers and cold plates. USA.
  • Madden Manufacturing, Inc.
    Designs and manufactures diaphragm type metering pumps for chemicals and industrial steam system equipment. Products include miniature liquid to liquid heat exchangers, pump seal flush coolers, boiler continuous blowdown heat recovery systems, chemical metering pumps, chemical feed systems packaged to include pump, tank, piping and controls. USA.
  • Thermatron Engineering Inc.
    Manufactures compact liquid-to-air copper and stainless steel circuited heat exchangers used for cooling of electronics, laser, semiconductor manufacturing and test equipment, and similar applications. USA.

Lamps, light bulbs, lighting fixtures

2009 Electronics manufacturers directory • (Heat exchangers section) • Site map